MLB - PHI Cookie Cutters and Stamps

PHI - 100mm (4in) cutter and deboss stamp.stl

Heinkel He-112

1-160-Landing-Heinkel_He112.stl

1/160 (Landing Mode) (x1) White Matte Plastic

1/160 (Landing Mode) (x1) Gray Matte Plastic

1/200 (Landing Mode) (x2) White Matte Plastic

1/200 (Landing Mode) (x2) Gray Matte Plastic

1/200 (Landing Mode) (x1) Tan Fine Detail Plastic

1/100 (Landing Mode) (x1) White Matte Plastic

1/100 (Landing Mode) (x1) Gray Matte Plastic

1/144 (Landing Mode) (x1) White Matte Plastic

1/200 (Landing Mode) (x1) Clear Ultra-Fine Plastic

1/200 (Landing Mode) (x1) Semi-Transparent Ultra-Fine Plastic

1/144 (Landing Mode) (x1) Gray Matte Plastic

1/500 (Landing Mode) (x12) Semi-Transparent Ultra-Fine Plastic

1/87 (Landing Mode) (x1) White Matte Plastic

1/600 (Landing Mode) (x24) Semi-Transparent Ultra-Fine Plastic

1/700 (Landing Mode) (x36) Semi-Transparent Ultra-Fine Plastic

1/87 (Landing Mode) (x1) Gray Matte Plastic

1/400 (Landing Mode) (x8) Semi-Transparent Ultra-Fine Plastic

1/285 (Landing Mode) (x4) Tan Fine Detail Plastic

1/285 (Landing Mode) (x4) Clear Ultra-Fine Plastic

1/285 (Landing Mode) (x4) Semi-Transparent Ultra-Fine Plastic

1/350 (Landing Mode) (x8) Semi-Transparent Ultra-Fine Plastic

1/72 (Landing Mode) (x1) White Matte Plastic

1/72 (Landing Mode) (x1) Gray Matte Plastic

1/64 (Landing Mode) (x1) White Matte Plastic

1/64 (Landing Mode) (x1) Gray Matte Plastic

Axial SCX10 II Shortie Battery & Servo Winch Mount

as2001-01_1-1_batt_winch.stl

as2001-01_1-1_batt_winch - White Matte Plastic

Heinkel He-P-1078A

1-144-Landing-Heinkel_P1078A.stl

1/285 (Landing Mode) (x2) Tan Fine Detail Plastic

1/160 (Landing Mode) (x2) White Matte Plastic

1/160 (Landing Mode) (x2) Gray Matte Plastic

1/285 (Landing Mode) (x2) Clear Ultra-Fine Plastic

1/285 (Landing Mode) (x2) Semi-Transparent Ultra-Fine Plastic

1/350 (Landing Mode) (x4) Semi-Transparent Ultra-Fine Plastic

Heinkel He-115 B-1

1-285-Landing-HE115.stl

1/285 (Landing Mode) (x1) White Matte Plastic

1/500 (Landing Mode) (x1) Tan Fine Detail Plastic

1/285 (Landing Mode) (x1) Gray Matte Plastic

1/700 (Landing Mode) (x3) Tan Fine Detail Plastic

1/600 (Landing Mode) (x2) Tan Fine Detail Plastic

1/500 (Landing Mode) (x1) Clear Ultra-Fine Plastic

1/500 (Landing Mode) (x1) Semi-Transparent Ultra-Fine Plastic

1/700 (Landing Mode) (x3) Clear Ultra-Fine Plastic

1/700 (Landing Mode) (x3) Semi-Transparent Ultra-Fine Plastic

1/600 (Landing Mode) (x2) Clear Ultra-Fine Plastic

1/600 (Landing Mode) (x2) Semi-Transparent Ultra-Fine Plastic

1/350 (Landing Mode) (x2) White Matte Plastic

1/350 (Landing Mode) (x2) Gray Matte Plastic

1/400 (Landing Mode) (x1) Tan Fine Detail Plastic

1/400 (Landing Mode) (x1) Clear Ultra-Fine Plastic

1/400 (Landing Mode) (x1) Semi-Transparent Ultra-Fine Plastic

1/350 (Landing Mode) (x1) Tan Fine Detail Plastic

1/200 (Landing Mode) (x1) White Matte Plastic

1/200 (Landing Mode) (x1) Gray Matte Plastic

1/350 (Landing Mode) (x1) Clear Ultra-Fine Plastic

1/350 (Landing Mode) (x1) Semi-Transparent Ultra-Fine Plastic

Heinkel He-176 V1

1-100-Landing-He176_V1.stl

1/144 (Landing Mode) (x2) White Matte Plastic

1/144 (Landing Mode) (x2) Gray Matte Plastic

1/160 (Landing Mode) (x2) Tan Fine Detail Plastic

1/160 (Landing Mode) (x2) Clear Ultra-Fine Plastic

1/160 (Landing Mode) (x2) Semi-Transparent Ultra-Fine Plastic

1/285 (Landing Mode) (x8) Semi-Transparent Ultra-Fine Plastic

1/144 (Landing Mode) (x2) Tan Fine Detail Plastic

1/144 (Landing Mode) (x2) Clear Ultra-Fine Plastic

1/144 (Landing Mode) (x2) Semi-Transparent Ultra-Fine Plastic

1/200 (Landing Mode) (x4) Semi-Transparent Ultra-Fine Plastic

MLB - ATL Cookie Cutters and Stamps

ATL - 100mm (4in) cutter and deboss stamp.stl

Modular Spinning Display Tower - Rotating Stand

base - Part 1.stl

Skeleton Swordsman.stl

Gnome v2.stl

Scourge Assimar.stl

Scourage Assimar.stl

Fallen Aasimar.stl

Fallen v5.stl

Halloween Oogie Boogie Pikachu (Easy Print No Supports)

HalloweenPikachu2024.stl

Halloween Gengar (Easy Print No Supports)

HalloweenGengar2024.stl

Halloween Pikachu (Easy Print No Supports)

HalloweenPikachu2024_01.stl

Halloween Psyduck (Easy Print No Supports)

HalloweenPsyduck2024_02.stl

CJ5 76-86 Column Cover

Column Bottom Cover.stl

Helwan HA-300

1-200-Landing-Helwan_HA300_HD.stl

1/160 (Flight Mode) (x1) White Matte Plastic

1/160 (Flight Mode) (x1) Gray Matte Plastic

1/285 (Flight Mode) (x3) White Matte Plastic

1/285 (Landing Mode) (x3) White Matte Plastic

1/144 (Flight Mode) (x1) White Matte Plastic

1/285 (Flight Mode) (x3) Gray Matte Plastic

1/285 (Landing Mode) (x3) Gray Matte Plastic

1/144 (Flight Mode) (x1) Gray Matte Plastic

1/200 (Flight Mode) (x2) White Matte Plastic

1/200 (Flight Mode) (x2) Gray Matte Plastic

1/200 (Flight Mode) (x1) Tan Fine Detail Plastic

1/285 (Flight Mode) (x2) Tan Fine Detail Plastic

1/285 (Flight Mode) (x2) Clear Ultra-Fine Plastic

1/285 (Flight Mode) (x2) Semi-Transparent Ultra-Fine Plastic

1/400 (Flight Mode) (x6) Semi-Transparent Ultra-Fine Plastic

1/350 (Flight Mode) (x4) Semi-Transparent Ultra-Fine Plastic

1/500 (Flight Mode) (x12) Semi-Transparent Ultra-Fine Plastic

1/200 (Flight Mode) (x1) Clear Ultra-Fine Plastic

1/200 (Flight Mode) (x1) Semi-Transparent Ultra-Fine Plastic

1/400 (Landing Mode) (x6) Semi-Transparent Ultra-Fine Plastic

1/48 (Landing Mode) (x1) White Matte Plastic

1/48 (Landing Mode) (x1) Gray Matte Plastic

Henschel Hs-126

1-160-Landing-Hs126.stl

1/400 (Landing Mode) (x4) Semi-Transparent Ultra-Fine Plastic

1/160 (Landing Mode) (x1) Tan Fine Detail Plastic

1/160 (Landing Mode) (x1) Clear Ultra-Fine Plastic

1/160 (Landing Mode) (x1) Semi-Transparent Ultra-Fine Plastic

1/144 (Landing Mode) (x1) Tan Fine Detail Plastic

1/144 (Landing Mode) (x1) Clear Ultra-Fine Plastic

1/144 (Landing Mode) (x1) Semi-Transparent Ultra-Fine Plastic

Weathered Blade

Weathered_Blade_OBJ.obj

Relive the magic of the Legend of Zelda with this **LED Zelda Master Sword Frikarte3D Remix**, a 3D printable model that lights up. This model, is a remix of the [Adafruit model](https://www.thingiverse.com/thing:3780266), which is also a remix of the original model by [Chaos Core Tech](https://www.thingiverse.com/thing:1449187). Frikarte3D made this model for a carnival troupe that dressed up as a wedding cake, and he needed a sword to pretend to cut the cake with his wife. He modified the files to suit his needs and added some features to make it easier to print and assemble.

**This model has the following differences from the original models:**
- It has a hole in the wings that fits the manual controller for the LED lights he used, and removed the hole for the Adafruit Feather board.
- It has a hole in the handle for a button that can turn on the lights, in case the power bank has one. It also has a button and some sockets for the screws on the mini battery plate. If your power bank don't have this button, just print the no hole version twice.
- It has a modified tip of the sword that avoids a hole in the print and fits the LED strip better.
- It has some pins to align the bottom of the sword blade and some of the parts.
- It has some pieces to reinforce the horizontal joints between the different parts of the sword that can be used or not.
- It has fixed the general problems of the structure of some of the parts, such as geometrical errors on the cut zones, reversed faces, thin walls, and holes in the mesh.

**This is are the components I used to build this**
- [RGB 5050 LED Strip Light DC 5V USB 3 Key Control Flexible Tape](https://s.click.aliexpress.com/e/_DmqDyL7)
- [WST 3350mAh Mini Power Bank with USB Port](https://s.click.aliexpress.com/e/_DEfYpM1)
- [Hot Glue Gun](https://s.click.aliexpress.com/e/_DdZO9DT)

**This model also has the following advantages and disadvantages compared to the original models:**

**Advantages:**
- The cost of the materials is cheaper, as it only requires an LED strip and a power bank, which cost less than €20, compared to the more than €100 of the Adafruit components.
- You don’t need to know how to solder to make this project, just the basics of how to disassemble a power bank without damaging it and how to plug USB cables.
- You have Bambu Studio 3mf files for direct printing files, and even a multi-color version.
- All files have been repaired and reviewed to print correctly and to use the minimum supports required.

**Disadvantages:**
- Using lower quality LEDs makes the appearance less cool.
- Not using the Adafruit feather makes the lighting effect simplier.
- It has not sound effects
- Using a power bank with USB LED strips can mean that they will still consume the battery even if they are not lit, so it will have to be charged more often.
- It remains to solve where to put the USB charging cable to make it more hidden and elegant.

This LED Zelda Master Sword Frikarte3D Remix is a perfect 3D printable model for any fan of the Legend of Zelda, or anyone who wants to have a fun and original accessory for cosplay, carnival or a party. It has LED lights that make it look like a real sword from the game. You can see [how Frikarte3D built the entire sword and the final result on his Instagram](https://www.instagram.com/stories/highlights/17846524131155915/). If asked I can post instructions of how I build it on my blog.

Download LED Zelda Master Sword Frikarte3D Remix today and enjoy this cool piece of 3D printable model cosplay!

This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without original designer explicit written consent.

To sell them legally, message the designer.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

LED Zelda Master Sword Remix

Multicolor LED Zelda Master Sword Frikarte3D.3mf

Get into the holiday spirit with this charming reindeer vase, perfect for adding a touch of fun and whimsy to your decor! Featuring cute antlers and a playful red nose, this vase is designed to bring joy to any space. Ideal for displaying twigs, dried flowers, or even holiday decorations!

This STL file is ready for download, so you can print your own and add a unique, festive accent to your home. Don’t forget to check out more of my designs.
Happy printing and happy holidays! 🎉

Adorable Reindeer Vase! Perfect for the Holidays

Moose body.stl

A coaster in the design of a 20-sided die! Catches all the condensation from your (and your guests') drinks to protect your games and tables!

**Like this? Follow me! 💖** _thanks!_

👀 **See it in action:**
https://youtube.com/shorts/GIk3R-WAuMw?feature=share

https://youtube.com/shorts/79r3EStkevM?si=2tvAhSI_zbM2Qhz5

---

**Interested in selling physical prints?**
[Become a member for a commercial use license](https://thangs.com/designer/karenchaudesigns?plans=true)

**Related models:**
Single-color d20 coaster: https://than.gs/m/920019
Meeple dice tray: https://than.gs/m/917413


Multi-color d20 coaster

A coaster in the design of a 20-sided die! Catches all the condensation from your (and your guests') drinks to protect your games and tables!

**Like this? Follow me! 💖**

👀 **See it in action:**
https://youtube.com/shorts/GIk3R-WAuMw?feature=share

https://youtube.com/shorts/79r3EStkevM?si=2tvAhSI_zbM2Qhz5

---

**Interested in selling physical prints?**
[Become a member for a commercial use license](https://thangs.com/designer/karenchaudesigns?plans=true)

**Related model:**
Meeple dice tray: https://than.gs/m/917413


d20 coaster

A coaster in the design of a 20-sided die! Catches all the condensation from your (and your guests') drinks to protect your games and tables!

**Like & follow for more free 3D models!**

---

**Interested in selling physical prints?**
[Become a member for a commercial use license](https://thangs.com/designer/karenchaudesigns?plans=true)

**Related model:**
Meeple dice tray: https://than.gs/m/917413


The unique texture on these vases was made by etching a mathematical vector field into the surface of the vase. Download includes versions for both standard and vase mode printing in three sizes.

Most Popular across Thangs

Most Popular this Week

Categories

Popular

Trending

Popular

Paid

Makes

Videos

New Uploads

Downloads

Trending

Popular

Paid

Makes

Videos

New Uploads

Downloads

MLB - PHI Cookie Cutters and Stamps

Heinkel He-112

Axial SCX10 II Shortie Battery & Servo Winch Mount

Heinkel He-P-1078A

Heinkel He-115 B-1

Heinkel He-176 V1

MLB - ATL Cookie Cutters and Stamps

Modular Spinning Display Tower - Rotating Stand

Skeleton Swordsman.stl

Gnome v2.stl

Scourge Assimar.stl

Fallen Aasimar.stl

Halloween Oogie Boogie Pikachu (Easy Print No Supports)

Halloween Gengar (Easy Print No Supports)

Halloween Pikachu (Easy Print No Supports)

Halloween Psyduck (Easy Print No Supports)

CJ5 76-86 Column Cover

Helwan HA-300

Henschel Hs-126

Weathered Blade