Stackable Herb Dryer - Triangle Pattern

Triangle Pattern Display.stl

TPMS Tree (Gyroid)

TPMS Tree (Gyroid).stl

Celtic Knot Gridfinity Bin 1x2 Standard

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard:
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Truss Tree (Kelvin)

Truss Tree Kelvin.stl

Pliers - 3D printable tool

pliers_flowalistik_part1.stl

Knit Fabric Bowl

A contoured bowl with a delicate knit pattern.

See here for video: https://youtu.be/62-jRSQfk_Y 

This model is designed for resin printing and can be printed directly on the build plate with no supports.

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


Celtic Knot Gridfinity Bin 1x1 Standard

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard:
Celtic Knot Gridfinity Bin 1x1 Extended:
Celtic Knot Gridfinity Bin 1x2 Standard:
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Stackable Herb Dryer - Hex Pattern

Hexagonal Pattern Display.stl

TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

Celtic Knot Gridfinity Bin 1x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Pen holder

model142.stl

Architected Skull (FCC)

This skull is part of a series that demonstrates three of the architecting features in nTopology software.

See here for video: https://youtu.be/ZX4rk4VM46U 

In this series, the Gyroid Triply Periodic Minimal Surface, Face Centered Cubic Lattice and Hexagonal Honeycomb unit cells have been applied to a conformal cell map derived from the outer surface of the skull. Using this technique allows the structures to follow the bone contours and converge on the front and back of the skull.

See here for other models in the series:
Gyroid
FCC:
Hex Honeycomb:


Celtic Knot Gridfinity Bin 1x1 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended:
Celtic Knot Gridfinity Bin 1x2 Standard:
Celtic Knot Gridfinity Bin 1x2 Extended:
Celtic Knot Gridfinity Bin 2x2 Standard:
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Fischer Koch S Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Teardrop Pod (Truncated Cube Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice: https://than.gs/m/889700 
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


lattice

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Stackable Herb Dryer - Triangle Pattern

TPMS Tree (Gyroid)

Celtic Knot Gridfinity Bin 1x2 Standard

Truss Tree (Kelvin)

Pliers - 3D printable tool

Knit Fabric Bowl

Celtic Knot Gridfinity Bin 1x1 Standard

Stackable Herb Dryer - Hex Pattern

TPMS Tree (Fischer Koch S)

Celtic Knot Gridfinity Bin 1x2 Extended

Pen holder

Architected Skull (FCC)

Celtic Knot Gridfinity Bin 1x1 Extended

Fischer Koch S Tealight Holder

Teardrop Pod (Truncated Cube Lattice)

Gyroid Tealight Holder

Phone stand

Diamond Lattice Easter Egg 2025

Double Lattice Christmas Bulb 2024

Lattice Planter