Astrolabicon Pro Classic

astrolabicon-classic.stl

Sliding Square Puzzle (for laser marking) // 5x5

SlidingSquare_Tile_Flat.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

SKEWBITS // 011-015 (v1 OUTDATED)

011.stl

FIDJ Puzzle

fidj.stl

Dastardly Dovetail Box (Small)

smallDD_Bottom.stl

Death Valley // 3D Topographic Puzzle

body1.stl

KWOB Puzzle // Chamfered

kwob-chamfered.stl

KWOB // Sloped

kwob-sloped.stl

KWOB Puzzle // Rounded

kwob-rounded.stl

KWOB Puzzle // Classic

kwob.stl

Ripple // Sliding Puzzle

pieces.STL

Straight Escape // Sliding Puzzle

obstacles.STL

Catch the Criminal // Sliding Puzzle

criminal.STL

Ostomachion // Archimedes Puzzle

01-red.stl

KWOB Puzzle // Puffy

kwob-puffy.stl

Dastardly Dovetail Box (Large)

bigDD_Bottom.stl

Gale Crater of Mars // 3D Topographic Puzzle

4x4 Tsugite Cube Puzzle

4x4_White.stl

Tsugite Cube 2x2 Puzzle (3 sizes)

A.stl

brainteasers

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Astrolabicon Pro Classic

Sliding Square Puzzle (for laser marking) // 5x5

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

SKEWBITS // 011-015 (v1 OUTDATED)

FIDJ Puzzle

Dastardly Dovetail Box (Small)

Death Valley // 3D Topographic Puzzle

KWOB Puzzle // Chamfered

KWOB // Sloped

KWOB Puzzle // Rounded

KWOB Puzzle // Classic

Ripple // Sliding Puzzle

Straight Escape // Sliding Puzzle

Catch the Criminal // Sliding Puzzle

Ostomachion // Archimedes Puzzle

KWOB Puzzle // Puffy

Dastardly Dovetail Box (Large)

Gale Crater of Mars // 3D Topographic Puzzle

4x4 Tsugite Cube Puzzle

Tsugite Cube 2x2 Puzzle (3 sizes)