This model combines the functionality of both an AMS PTFE tube and cable release tool into one simple small part.

Can be stored hanging behind the end of the cable (see photo)

6m45s print time

BAMBU LABS AMS PTFE TUBE AND CABLE RELEASE TOOL

tool holder.step

honeycomb-patterned poop bucket for BBL X1 & P series.

The honeycomb-patterned poop bucket is a filament waste container specially designed for the Bambulab X1C, P1S, and P1P series 3D printers. It is intended to collect the waste produced by the printer when switching between different colored filaments.

This basket is easier to access than the previous version when it is behind the printer, so the two are not the same design.

The honeycomb pattern gives the bucket an aesthetic appearance while also allowing you to easily monitor the fill level of the waste inside. With its large capacity, it can easily store filament waste weighing around 350 grams, reducing the need for frequent emptying.

Magnets sized 3x8 mm can be placed into the magnet slots in the bucket. The model consists of two main parts that can be easily joined using the magnets, and you can easily separate them to empty the filament waste. Additionally, you can use the lock before emptying the waste, preventing any filament waste from falling out through the gap when separated.

This accessory, offering both a functional and stylish solution, is an ideal choice to make your 3D printing processes more organized and practical.


Print settings reminder:
Since this model has thin and long walls, it should be printed with Support Comb.
It is easy to remove after printing with Support Comb.
**Attached is a 3mf file with all settings made. This file is only for Bambulab printers.
**

Note: 
The first version I shared on my Makerworld page was designed as a single piece, but it caused some inconvenience for users when emptying filament waste. As a result, it has been redesigned to be detachable. Please note that the two designs should not be considered as one.


I would be happy if you look at the links below:
Link Tree: https://linktr.ee/a_ilterish
Instagram: https://www.instagram.com/a_ilterish/
Thangs: https://thangs.com/designer/A_ilterish
MakerWorld: https://makerworld.com/en/@A.ilterish
Cults3D: https://cults3d.com/en/users/A_ilterish/3d-models
Printables: https://www.printables.com/@ilterish_843470/models
MakerOnline: https://bit.ly/Makeronline

Poop bucket for BBL X1 & P1 series (Removable & Honeycomb-patterned)

With Honeycomb_P2.stl

The original twist in plugs for the Python AMS Enclosure are great, but the tolerance is a bit tight, and they are a pain in the fingers to twist in and out. I wanted something that would keep a good seal like the original plugs but be easier to put in. I designed these using one of the rear models of the enclosure for reference and printed them in Polymaker's PolyFlex TPU 90. They slotted in perfectly and can be easily pushed back out from the inside. I didn't size them down, so they fit like a glove… at least on my enclosure.

I have included 3 models:

1. The Python Plug for any of the spots that you just want to close off.

2. A PTFE tube version (i may decide to redesign this one to angle it downward but it seems to be working just fine so *Shrugs.

3. A power cable version with 2 variations. 
-- One has a cut down the middle of one side to allow you to insert the cable. I printed this one and it was easy enough to pull the split open by hand and insert the cable.
-- The other has no cut but I don't think you would be able to push the plug through so you would likely have to cut it with a razor blade.

Original Credit to humebeam for making the awesome Python AMS.

X1c

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads