Crystal Clearance Tower & Tolerance Card

Crystal Clearance Tower - Maker Tales.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘

Calibration Cube_ICPI.stl

🎲 𝙉𝙤𝙩 𝙩𝙝𝙚 𝙪𝙨𝙪𝙖𝙡 𝙘𝙖𝙡𝙞𝙗𝙧𝙖𝙩𝙞𝙤𝙣 𝙘𝙪𝙗𝙚 🎲

My own version of the popular model used to test out printing tolerances, surface quality and to tune up your slicing profiles for every filament change.

This 20mm calibration cube has almost everything you need to check before actually start your prints: overhangs, bridging, retraction, ghosting, stringing, etc.

You can enjoy making it and have an actual cool, original and good-looking cube!

Join the #𝙞𝙘𝙖𝙣𝙥𝙧𝙞𝙣𝙩𝙞𝙩 challenge , show up your printed cube!

Happy printing everyone! 🎲

⸻⸻⸻⸻⸻⸻⸻⸻

Don't be shy, share your make and be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.𝙞𝙩 in your socials!

⸻⸻⸻⸻⸻⸻⸻⸻

𝗜𝗡𝗦𝗧𝗔𝗚𝗥𝗔𝗠 : https://www.instagram.com/randomizy.3d/

𝗖𝗵𝗲𝗰𝗸 𝗠𝗼𝗿𝗲 𝗛𝗲𝗿𝗲 : https://linktr.ee/RandomizY

Clearance Conveyor

Assembly View Only (Do Not Print).3mf

Spinning tolerance test

3D print Tollerance test_.3mf

clearance tolerance tester 

Unlike most clearance testers, this one goes in 0.05 mm increments. While it isn't very fancy, it's easy and cheap to print, and doesn't suffer from inaccuracies from elephant's foot or difficulties with overhang.

If you're looking to implement hinges or other similar features to your prints, this tester will help you find the perfect fit  

Improved clearance tester 

Fitment Board

Fitment Board.STL

Tippi Tree Test Piece

Here's the test piece for [Tippi Tree](https://than.gs/m/933018). You can use it to make sure your printer settings are well-tuned for printing your Tippi Tree without using too much time or material.


Recommended: PLA 0.4mm nozzle, 0.16mm layer height, 11% infill, 2 shells, 5 top/bottom layers

Tolerance

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Crystal Clearance Tower & Tolerance Card

Calibration Cube_ICPI.stl

Clearance Conveyor

Spinning tolerance test

clearance tolerance tester

Fitment Board

Tippi Tree Test Piece

Fit and Tolerance Reference Tester

Hole Tolerance Tester

Tolerance Gadget

clearance gridfinity 1x1 10mm rod