Malfunctioning Creamer and Sugar Bowl

Sugar Bowl and Creamer Display.stl

Five-Piece Plain Flatware Set

Tablespoon - Plain.stl

Ipad, Tablet and laptop storage rack Updated

Ipad, Tablet and laptop storage rack. Holds 5 Devices. (NEW VERSION)

Please leave a comment and add a pic of your prints.

License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

Device Holder Updated.stl

"I Love 3D Printing" Remixing Mug

This file is intended for remixing! Download it, import into your favourite mesh editing software and do as much damage to it as you can! 

Once you’re ready to print why not test the limits of your printer? Crank up the speed, change the extrusion rate, what other parameters can you play with?

No matter what you do, just hit print and walk away! However it turns out will be the perfect, if not ironic, testament to your love of 3D printing! It will also a great gag gift for the other 3D printing enthusiasts in your life.

The model here demonstrates modifications that simulate clogged nozzles, layer shifts, and poor layer adhesion: https://social.thangs.com/m/491441 . 

See here for video of modified version: https://youtu.be/FJbw00gRW_4 


bowl "heliopora coral"

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%):  120 x 120 x 23 mm
- I would not scale it down below 40%

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: (100% scale): 17h

Material usage (80% scale):120g
Print time: (80% scale): 11h

Material usage (60% scale): 60g
Print time: (60% scale): 5h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

bowl_heliopra.stl

Cauldron Dice Cup

Rectangular Coral Sushi Platter

Do Not Print.stl

Tomato Basket

The perfect basket for your tomatoes. Use as-is for your cherry tomatoes, size it up for your field tomatoes. They might hold other things too, but this has not been tested.

See here for video: https://youtu.be/5shnnalmk5w 

The design is based on a double strand weave with a float length of two. Designed with Texmind Braider (http://texmind.com/wp/) and nTopology. 


blank yin n yang mugs for remixing. STL/STEP

blank yin n yang mugs for remixing.stl

Tea Set for Remixing (Teapot and Lid)

Teapot for Remixing.stl

Egg Cup "Crown" modern Look - Unique 3D Print Design | STL File | No Support needed

Eggcup in a modern style for EU standard sized eggs, looks fantastic in dull white on any dinner table.

🔹 D E T A I L S 🔹

- designed to be printed without support!
- very satisfing timelapse
- exceptional egg grip
- quick and easy print
- no resizing needed, 100% is perfect

I have printed quite a few of them out of PLA and never had any melting problems when I use them with hot eggs.  If you want them to dishwasher safe use ASA/ABS.

✔️ Want my favorite filament? Get it here! [Recommended Filament](https://factoriandesigns.com/products)

🔹 **only for private use!**
If you want to sell this printed model commercialy then **subscribe to my patreon** and get access and selling permisson to all my designs and additional benefits like using my pictures and e-commerce support!
https://www.patreon.com/FactorianDesigns

**You like what you see ?**
Then click on "download" and treat yourself or your loved to a unique present!

Thank you for your support!

🔹 S E E 🔹 M O R E 🔹
You like the art style? Then take a look at my other creations!
[Thangs Profile](https://thangs.com/designer/FactorianDesigns)
or on other platforms:
[Factorian Designs](https://factoriandesigns.com)

Egg Cup modern Look - Unique 3D Print Design for Breakfast | STL File

Garden shovel

Bottom_screws.stl

Crown Egg Holder – A Royal Touch for Your Breakfast!

crown.stl

Weaire-Phelan Highball

This “Weaire-Phelan Highball” is part of a set of three tableware pieces inspired by the Weaire-Phelan structure, the most mathematically efficient way for equal-volume bubbles to fit together to make foam. See here for video: https://youtu.be/f4YIuS_-hSE

This piece could be used as a vase or pencil holder.

The Weaire-Phelan structure is made up of two pentagonal dodecahedra (12-sided) and six tetrakaidecahedra (14-sided) that form a translation unit with a lattice periodicity which is simple cubic. In crystallography, this structure is also known as the A15 Frank-Kasper phase.

There is a good introduction to the “Weaire–Phelan structure” here: http://www.steelpillow.com/polyhedra/wp/wp.html 


Tea Set for Remixing (Teacup and Saucer)

Teacup for remixing.stl

Tea Set for Remixing (Sugar Bowl)

This Tea Set is modelled after a Royal Albert “Blossom Time” China set that has been in my family for years. I’ve used these models as starting points for several designs that you’ll find on my profile page. I also get a lot of requests for the raw files from people wanting to use them for their own Tea Set models and remixes.

So here you go! The files are printable as they are, but why not add your own creative twist? Add some texture? Emboss some text? Or remodel them completely!

Remember to upload your designs as remixes on Thangs to share your work: https://blog.thangs.com/thangs-101-remixes-c415d6c93af3 

Download all the pieces in the set:
Teapot and Lid: https://than.gs/m/873979 
Teacup and Saucer: https://than.gs/m/873981 
Plate: https://than.gs/m/873984 
Creamer: https://than.gs/m/873989 
Sugar Bowl:

(Note: Picture shows the real tea set used to model these!)


Weaire-Phelan Salver

This “Weaire-Phelan Salver” is part of a set of three tableware pieces inspired by the Weaire-Phelan structure, the most mathematically efficient way for equal-volume bubbles to fit together to make foam. See here for video: https://youtu.be/f4YIuS_-hSE

The Weaire-Phelan structure is made up of two pentagonal dodecahedra (12-sided) and six tetrakaidecahedra (14-sided) that form a translation unit with a lattice periodicity which is simple cubic. In crystallography, this structure is also known as the A15 Frank-Kasper phase.

There is a good introduction to the “Weaire–Phelan structure” here: http://www.steelpillow.com/polyhedra/wp/wp.html 


Corky | Note planter

corky.stl

Regal Egg Holder – A Touch of Elegance for Your Breakfast

bowl.stl

Faceted vase #functionalart

This intricately designed 3D model is a faceted vase featuring an impressive geometric design structure. With its sleek angles, polygonal makeup, and modern aesthetic, this model gives off an aura of contemporary elegance and uniqueness. #functionalart

Tableware

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Malfunctioning Creamer and Sugar Bowl

Five-Piece Plain Flatware Set

Ipad, Tablet and laptop storage rack Updated

"I Love 3D Printing" Remixing Mug

bowl "heliopora coral"

Cauldron Dice Cup

Rectangular Coral Sushi Platter

Tomato Basket

blank yin n yang mugs for remixing. STL/STEP

Tea Set for Remixing (Teapot and Lid)

Egg Cup "Crown" modern Look - Unique 3D Print Design | STL File | No Support needed

Garden shovel

Crown Egg Holder – A Royal Touch for Your Breakfast!

Weaire-Phelan Highball

Tea Set for Remixing (Teacup and Saucer)

Tea Set for Remixing (Sugar Bowl)

Weaire-Phelan Salver

Corky | Note planter

Regal Egg Holder – A Touch of Elegance for Your Breakfast

Faceted vase #functionalart