Set the first layer to 0.10mm for better color infusion (if you are using filament like **Esun PLA-Silk Mystic** ,whic i used.)
For the rest of the print, set the layer height to 0.22mm.

**Add a pause at layer 3** to lay down the fabric and secure it with magnets.(https://www.amazon.com/dp/B096G9JN3X)

**Add another pause at layer 16** to place the magnets.
The magnet size is **20x10x2mm**. When the print pauses at layer 16, place the **4 magnets** for the lid.(https://www.amazon.com/dp/B0BMTZX4ND?th=1) 
**Ensure all magnets are placed facing the same direction; otherwise, the lid will not close properly.**

You can use the plate included with the file to cut the inner fabric of the bag (https://www.amazon.com/dp/B0BXSKQRZ4?th=1)
Once the fabric is cut, place it inside the bag accordingly and glue it using **Pattex Contact adhesive (plastic version) or E6000.**

Before assembling the side parts of the bag, press the tip of a sharp knife into the hole to make an opening for attaching the D-ring. You need to pierce the fabric from the inside of the bag outward. If you try to pierce it from the outside in, the fabric might come apart—though I haven't tested this myself. It's best to follow the method I used.
After making the hole in the fabric, you can super glue the side parts of the bag together. Once the bag is assembled, you will need these parts: https://www.amazon.com/dp/B0BM7D31RP?th=1    https://www.amazon.com/dp/B0CSN9CY8Y?th=1 


**I would like to extend my special thanks and respect to Kaizen3DPrints, who inspired me to create this model and allowed me to sell it as a model. I saw the clutch bag video on YouTube, and until that moment, the idea of 3D printing on fabric with an FDM printer had never crossed my mind. He showed me an entirely new ocean.**

The video I added is the video of **Kaizen3DPrints** assembling the bag, and my version goes through the same steps. By watching his video, you can also assemble this bag, which will also help his videos get more views. The main reason I added his video is that my speaking isn't fluent. If I could speak more fluently, I would have made my own video. (At this point, I'm saving your ears from the pain)










Polka Dot And Square Pattern Clutch Bag

3d clutch bag obj.obj

This pattern is for a pair of short fingerless gloves. This 3D printed model will require some basic sewing skills. There are three sizes - Small (13cm at wrist), medium (18cm at wrist), and large (21cm at wrist). There will also be some variation depending on what mesh fabric you print on, in addition to what fabric you use as the lining. I prefer using this superfine 4 way powermesh found on amazon - https://a.co/d/dTW0w4M

The 3mf file contains settings and all three sizes. If you'd like to download a single size, make sure to get both side 1 and side 2. This model is .72mm tall. Print this at .24mm layer height with a .4mm nozzle. I print at 35mm/s for the first layer, and 50mm/s per second on the other two layers. If you are using a thicker mesh fabric, use a larger layer height to avoid the snagging of fabric.

I use a magnetic PFLAT sheet found at www.kaizen3dprints.com but you can also use a textured build plate if you'd like, or other sticker print plate variations.

The pause command is entered at layer two, where your fabric and magnets are placed and a little tension on the fabric is applied. The print resumes and will finish after layer 3. Remove side 1 of your size, and reprint side 2. These are simply mirror copies of each other.

Once both prints are finished, find a base fabric of your choosing (velvet, satin, stretch denim, velour etc) and cut a matching piece leaving around 1/2" of seam allowance. Pin the 3d printed mesh on top. Sew a straight stitch with a zipper foot all the way around side 1, fully attaching the lining and 3d printed mesh together. Sew as close to the 3d printed material as you can.  Repeat for side 2. Line up both sides, right sides together (3d printed sides facing each other) and pin both sides together, preparing for a zig zag stitch. Using a zig zag stitch to increase the gloves flexibility, sew the sides and the small portion between your thumb and fingers. Trim away the excess fabric outside of the zig zag stitch. Leave the top, bottom, and thumb holes. You can either create a small hem for these three areas, or trim them off directly adjacent to your straight stitch. Fold the glove right side out, and enjoy your hard work! If you'd like a set of gloves, simply repeat this process!

If you have any questions please send an email to Kaizen3DPrints@gmail.com

Shiny

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Polka Dot And Square Pattern Clutch Bag

Short fingerless gloves