Lil Astro Puzzle // Mini Astrolabicon

LilAstro.stl

Astrolabicon Pro

astrolabicon-pro.stl

the CHAIN puzzle // Retro

thechain-retro-v2.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

Cube Stands

big-stand.stl

Astrolabicon Pro Classic

astrolabicon-classic.stl

Rubik's Cube Podium Display Stand

rubics cube podium.step

FIDJ Puzzle

fidj.stl

KWOB Puzzle // Chamfered

kwob-chamfered.stl

KWOB Puzzle // Rounded

kwob-rounded.stl

the Psychlopath Puzzle

psychlopath-13-8mm-a.stl

KWOB Puzzle // Classic

kwob.stl

Multiboard Rubiks Cube Display

Rubiks Final.stl

KWOB Puzzle // Puffy

kwob-puffy.stl

TwistedHex.stl

Rubiks

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lil Astro Puzzle // Mini Astrolabicon

Astrolabicon Pro

the CHAIN puzzle // Retro

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

Cube Stands

Astrolabicon Pro Classic

Rubik's Cube Podium Display Stand

FIDJ Puzzle

KWOB Puzzle // Chamfered

KWOB Puzzle // Rounded

the Psychlopath Puzzle

KWOB Puzzle // Classic

Multiboard Rubiks Cube Display

KWOB Puzzle // Puffy

TwistedHex.stl