**Disclaimer**

This adapter is intended for use with non‑original, lower‑capacity Battery. It is not a replacement for the official WOLFANG GA420 battery.  Always verify correct voltage and polarity before powering the camera. The creator is not responsible for damage, malfunction, or reduced performance resulting from the use of third‑party or low‑capacity power options.

**Battery Insert Adapter for WOLFANG GA420**

A custom‑designed battery insert adapter made specifically for the WOLFANG GA420 action camera. This insert allows you to power the camera using an alternative battery setup.

When purchasing the GA420, there were batteries advertised as compatible — same brand family, same voltage, and similar capacity. However, the replacement battery available at the time was a different physical size, making it impossible to use directly in the camera.
This STL provides a practical solution: an insert that fills the battery compartment and allows you to route power from an external or differently sized battery safely and cleanly.

**Features**

    Precise fit for the WOLFANG GA420 battery compartment

    Clean internal channel for routing power leads

    Snug, stable insertion with reliable tolerances

    Compatible with both FDM and resin (SLA/DLP/LCD) printing

**Printing Notes**

Do not use PLA — the GA420 is known to run warm, and PLA may soften or deform

Recommended materials: ABS, Nylon, or PETG for heat resistance and durability

Use a 0.2 mm nozzle (or finer) — the walls are thin and benefit from higher precision

Print with 0% infill — the model is designed with thin walls and does not require internal structure

Standard 0.2 mm layer height for FDM

Resin prints offer excellent dimensional accuracy

No supports required (if true for your model)

Depending on your build surface, a brim may be needed — the main wall is thin and benefits from extra adhesion

Slow print speeds recommended: around 50 mm/s for cleaner walls and better dimensional accuracy

Approximate print time: around 10 minutes at 50mm/s

Material usage: roughly 20 g total

Battery insert adapter for WOLFANG GA420 

Battery_Adapter_Wolf.stl

A playful sculpture designed for printing with clear resin.

See here for video: https://youtu.be/yqaangODihg 

To print, raise the object 5-6mm off the build plate as oriented and generate supports to the bottom and up along the threaded portion. There is a drainage hole leading up from the bottom and into the lightbulb cavity. This hole essential to prevent suctioning during the printing of the bulb and to allow uncured resin to drain out after printing. If desired, it can be filled afterwards with the plug and extra resin.


Lightbulb Moment

Lightbulb Moment.stl

A model of a small incandescent light bulb designed for printing with clear resin. The inner wiring of the light bulb only becomes visible when printed with clear resin.

See here for video: https://youtu.be/BRS2gbPtF_M 

To print, raise the object 5-6mm off the build plate as oriented and generate supports to the bottom and up along the threaded portion. There is a drainage hole leading up from the bottom and into the lightbulb cavity. This hole essential to prevent suctioning during the printing of the bulb and to allow uncured resin to drain out after printing. If desired, it can be filled afterwards with extra resin.


Small Light Bulb

Small Light Bulb.stl

🎉 Exciting News! 🎉

I’m thrilled to re-enter my Bendy Beast model, which previously won first place, into the Thangs Throwback Contest! 🏆

Why You’ll Love the Bendy Beast:

Universally Compatible: Tailored to fit most printers, the Bendy Beast is ready to make its mark in any maker’s collection.
Newbie-Approved: It’s the perfect project for those just dipping their toes into the vibrant waters of 3D printing.
Zero Hassle: Say goodbye to supports! This fully articulated design prints smoothly, letting you focus on the fun.

COPYRIGHT KINDNESS: At Mesh Mayhem, we cherish creativity and respect ownership. Our designs, including the Bendy Beast, are copyrighted for personal enjoyment.

We encourage personal use and sharing your journey with us, but commercial use requires a special touch – a Mesh Mayhem commercial license. So, if you’re looking to sell, let’s make it official! Our membership offers you the license you need, plus a treasure trove of perks.

Join us, and let’s create magic together!

Please, no commercialization without a license. Let’s play fair and have fun!

Did we catch your eye? We’d love to see your Bendy Beast come to life! Share your prints in the comments and spread the joy.

Resin printing

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Battery insert adapter for WOLFANG GA420

Lightbulb Moment

Small Light Bulb

BendyBeast Articulated Dragon #Throwback