Eeyore -Winnie The Pooh

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt from last years Sculptober on our Patreon***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech***

Eeyore

Articulated baby crystal dragon.stl

A baby crystal dragon that can be 3d printed without supports or a raft. I will make an adult crystal dragon as well.

Christmas scene in Christmas Ball

scene 4.stl

Articulated Print-In-Place Christmas Nutcracker v1

Nutcracker TOP.stl

Easter egg house

Base v1.stl

Tealight Christmas tree

This is a semi-realistic Christmas tree that can be illuminated with an ELECTRIC tealight (no flames please).

The best part is: it can be printed in vase mode, that means no support, no seams, thin walls for illumination, and it prints super fast.

The tree is 75 x 120mm, with a 40mm hole in the bottom. Feel free to scale it up or down to fit your needs.
Print with spiral vase mode.

Suggested settings:
- 5 bottom layers
- 1 top layer
- 0.2mm layer height
- 0.6 line width

Max Goof Bust -A Goofy Movie

MaxBust_Bust.stl

MiniMonster#4 Baby Chameleon Articulated Flexi

MiniMonster4BabyChameleonPrintStart3D.stl

Festive Christmas Ornaments

CHRISTMAS ORNAMENTS

CHRISTMAS_ORNAMENTS_19-24.stl

Vase Mode Christmas tree

This is a simple Christmas tree designed to be printed in vase mode. It should be printed without support and only a single spiral wall. 

It only took 25 min and 13g to print this using an 0.8mm nozzle, 0.4mm layer height and 0.8mm line width. 

Christmas Tree

tree.stl

vaporeon - Pokémon - Fan Art - Christmas Ornament 

vaporeon_-_xmas_decoration.stl

Balloon Dog -Meditation 

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
A fun series of balloon animals I've always wanted to make! Hope you enjoy!
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chaoscoretech

Christmas Moose Ornament

A moose designed to be a Christmas Ornament

This is an easy-to-print, modern Christmas tree. Looks really well as a winter decoration. It can be printed in vase mode as well as standard mode.

---

**Recommended print settings**

- vase mode: yes
- bottom solid layers: 7
- extrusion width: 1 mm

Printing it with 1 mm extrusion width makes it solid enough.

This model prints nicely with fuzzy skin feature on it. It adds additional strength and hardiness to the walls.

When printing in standard mode, seam position should be set to aligned.

The tip of the tree should be printed slowly to avoid unwanted deformations.

Xmas Tree

Starburst Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Diamond Lattice Christmas Ball

Small Reindeer Ornament

Our small Reindeer we made into a christmas ornament 

Candy Cane Christmas Tree

candy_cane_christmas_tree_-_red_v1.stl

Easter Bunny with Basket

Easy to print Easter Bunny with a basket on its back large enough to hold a cadbury egg. Prints without supports on most printers

People & SOciety

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Eeyore -Winnie The Pooh

Articulated baby crystal dragon.stl

Christmas scene in Christmas Ball

Articulated Print-In-Place Christmas Nutcracker v1

Easter egg house

Tealight Christmas tree

Max Goof Bust -A Goofy Movie

MiniMonster#4 Baby Chameleon Articulated Flexi

Festive Christmas Ornaments

CHRISTMAS ORNAMENTS

Vase Mode Christmas tree

Christmas Tree

vaporeon - Pokémon - Fan Art - Christmas Ornament

Balloon Dog -Meditation

Christmas Moose Ornament

Christmas Tree

Starburst Christmas Ornament

Small Reindeer Ornament

Candy Cane Christmas Tree

Easter Bunny with Basket