🧙‍♂️ The MetaMorph Deck Box
The Ultimate Modular Deck Box for EDH, Commander, or Any TCG!

This compact but powerful deck box is packed with smart features. Built for Magic: The Gathering, Pokémon, or other trading card games, it holds up to 110 double-sleeved cards, even using thicker sealable sleeves.

📦 Product Specs
Outer Dimensions: 3.75" x 3.75" x 6"

Inner Storage: 3" x 3" x 4.25"

Capacity: 110 double-sleeved cards (tested with DS Matte Sleeves + DS Perfect Fit Sealables)

🔍 Front-Facing Top Loader Display
Tired of guessing which deck is inside?
This deck box includes a card display slot that fits a standard top loader so you can showcase your commander, signature card, or art—no more digging through boxes.

🧲 Optional Magnetic Life Counter
Add a matching MetaMorph Magnetic Life Counter (sold separately) that snaps to the top of your deck box using built-in magnets.


GEARXYZ MetaMorph MiniLith Wall mount Deckbox

GEARXYZ MetaMorph MiniLithBambuSlicer.3mf

The wait is over. Here is the Full Size Buster Sword Deck Box. This fits 4+ decks, 1 playmat, and a bunch of dice. I have provided 2 3mf Files. a 4 deck and a 6 deck 3mf. If you print the 4 deck option you can always expand to 6 or more later. You just need to print a couple more nuts, a sword part, and a lid. 

**This will require a 256mm cubed or larger print volume. I printed this on my P1S and A1. I will not be cutting this up to fit on smaller printers. **

4 deck option is roughly 1.5kg. 1 day 2 hours @ .28mm layer height. 
6 deck option is just over 2kg. 1 day 10 hours @ .28mm layer height.

I printed the handle with like 30% infill I believe. If you are going to actually throw a bunch of decks in there I highly suggest printing the handle as filled as you can. And you probably want to test things on your end to make sure its holding like you think it should. I tested 4 decks, dice, and a playmat and it held up nicely. 

Currently mine is all held together with the screw system I came up with. It works nicely. If you have any questions before or after purchase please don't hesitate to reach out.  

Full Size Buster Sword Holds 4+decks

Full size buster sword Holds 6 Decks.3mf

This is a commander size deck box based on the art for Icy Manipulator. It screws together. There is a tray file that is necessary to keep the deck in place in the box.

The Deck Cavity is 70mmx70mmx100mm. This will fit 100+ Single sleeved cards and a space for tokens and dice. This is printable without supports. 

Entire Icy Manipulator.3mf

Bottom Cut off Piece.stl

Bottom.stl

Holder1.stl

Top Cut off Piece.stl

Top.stl

Tray.stl

This version of CardDock is for MTG cards but please note I have created various MTG card versions based on user requests and testing.  Please note the size of this version and compare it to your needs and other MTG CardDocks listed here...

**This model:**
[MTG (Version TA): 2.7 in. (69 mm) by 3.65 in. (93 mm) about 100 cards in sleeves](https://than.gs/m/1336472)

**Other models available:**
[MTG (Version XA): 3.5 in. (89 mm) by 5. in. (127 mm), about 111 cards](https://than.gs/m/1336464) 
[MTG (Version XB): 3.35 in. (85 mm) by 4.84 in. (123 mm) about 100 cards](https://than.gs/m/1336470)
[MTG (Version XD): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 40 cards stacking to a height of about 1.18 in. (30 mm) high](https://than.gs/m/1354490)
[MTG (Version XE): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 60 cards stacking to a height of about 1.77 in. (45 mm) high](https://than.gs/m/1354500)

CardDock is a novel card cradle that automatically aligns the cards once they are dropped on the CardDock.  The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use.    A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.

The lid can be snapped onto the underside of the CareDock to lift the CardDock up.

100% printed - no hardware, fasteners, or adhesives required.  No support is required.

See included image for Print Settings

**Related Links**

[Standard playing cards, single deck](https://than.gs/m/1326834)
[Standard playing cards, double deck](https://than.gs/m/1332115)
[Bridge cards, double deck](https://than.gs/m/1333752)
[UNO cards, 112 count](https://than.gs/m/1332775)
[Pokemon and similar cards, 60 count](https://than.gs/m/1333423)

Visit my blog for more information and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.

CardDock for MTG Cards (Version TA) - Auto-aligning Card Deck Holder and Case

Card Dock MTG-TA 1v00a6 Base.stl

This version of CardDock is for MTG cards but please note I have created various MTG card versions based on user requests and testing.  Please note the size of this version and compare it to your needs and other MTG CardDocks listed here...

**This model:**
MTG (Version XB): 3.35 in. (85 mm) by 4.84 in. (123 mm) about 100 cards

**Other models available:**
[MTG (Version TA): 2.7 in. (69 mm) by 3.65 in. (93 mm) about 100 cards in sleeves](https://than.gs/m/1336472) (this model)
[MTG (Version XA): 3.5 in. (89 mm) by 5. in. (127 mm), about 111 cards](https://than.gs/m/1336464) 
[MTG (Version XD): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 40 cards stacking to a height of about 1.18 in. (30 mm) high](https://than.gs/m/1354490)
[MTG (Version XE): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 60 cards stacking to a height of about 1.77 in. (45 mm) high](https://than.gs/m/1354500)

CardDock is a novel card cradle that automatically aligns the cards once they are dropped on the CardDock.  The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use.    A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.

The lid can be snapped onto the underside of the CareDock to lift the CardDock up.

100% printed - no hardware, fasteners, or adhesives required.  No support is required.

See included image for Print Settings

**Related Links**

[Standard playing cards, single deck](https://than.gs/m/1326834)
[Standard playing cards, double deck](https://than.gs/m/1332115)
[Bridge cards, double deck](https://than.gs/m/1333752)
[UNO cards, 112 count](https://than.gs/m/1332775)
[Pokemon and similar cards, 60 count](https://than.gs/m/1333423)

Visit my blog for more information and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.



CardDock for MTG Cards (Version XB) - Auto-aligning Card Deck Holder and Case

Card Dock MTG-XB 1v00a6 base.stl

This version of CardDock is for MTG cards but please note I have created various MTG card versions based on user requests and testing.  Please note the size of this version and compare it to your needs and other MTG CardDocks listed here...

**This model:**
MTG (Version XA): 3.5 in. (89 mm) by 5. in. (127 mm), about 111 cards

**Other models available:**
[MTG (Version TA): 2.7 in. (69 mm) by 3.65 in. (93 mm) about 100 cards in sleeves](https://than.gs/m/1336472) (this model)
[MTG (Version XB): 3.35 in. (85 mm) by 4.84 in. (123 mm) about 100 cards](https://than.gs/m/1336470)
[MTG (Version XD): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 40 cards stacking to a height of about 1.18 in. (30 mm) high](https://than.gs/m/1354490)
[MTG (Version XE): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 60 cards stacking to a height of about 1.77 in. (45 mm) high](https://than.gs/m/1354500)


CardDock is a novel card cradle that automatically aligns the cards once they are dropped on the CardDock.  The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use.    A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.

The lid can be snapped onto the underside of the CareDock to lift the CardDock up.

100% printed - no hardware, fasteners, or adhesives required.  No support is required.

See included image for Print Settings

**Related Links**

[Standard playing cards, single deck](https://than.gs/m/1326834)
[Standard playing cards, double deck](https://than.gs/m/1332115)
[Bridge cards, double deck](https://than.gs/m/1333752)
[UNO cards, 112 count](https://than.gs/m/1332775)
[Pokemon and similar cards, 60 count](https://than.gs/m/1333423)

Visit my blog for more information and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.



CardDock for MTG Cards (Version XA) - Auto-aligning Card Deck Holder and Case

CardDock MTG-XA 1v00a6 base.stl

This is a variation of my original card box I created for Arkham horror cards, but it doesn't have a tab on the spine for interlocking rows of these boxes.

Instead, this is a simple print-in-place box that has the correct dimensions for standard casino poker cards still in the box. Typically the card boxes are very flimsy so this box will protect your cards after the original box fails.

Interior dimensions are 66 mm x 93 mm which should fit standard Magic: The Gathering cards in protective sleeves or Vegas style poker cards.

As a bonus, you can use this box for other applications like board game cards or whatever. Let me know if you'd like a version without the holes and I can post that as well.

MtG

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEARXYZ MetaMorph MiniLith Wall mount Deckbox

Full Size Buster Sword Holds 4+decks

Entire Icy Manipulator.3mf