Print of STG-01 Exor from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head.

Exor

Exor_Beige.3mf

I am delighted to announce that I have updated one of my most popular designs: the iconic Ferrari F40 for 3D printing. This model, previously published on Cults3D, is now available for the first time on Patreon and Thanqs. Along with this announcement, I have attached an image so you can see the breakdown of the design and the improvements I have made.

The Ferrari F40 is a symbol of speed and luxury, and it was the last car approved by Enzo Ferrari before his passing. With its aggressive design and impressive performance, the F40 has become a legend in the automotive world since its launch in 1987. One of the most fascinating anecdotes about this model is that it was designed to celebrate Ferrari's 40th anniversary and quickly became the fastest car in the world at that time.

I have worked meticulously to ensure that every detail of the Ferrari F40 is captured in this 3D model, from its distinctive spoilers to its aerodynamic lines. The improvements made ensure an even more precise and detailed printing experience.

Don't miss the opportunity to add this automotive gem to your collection. Stay tuned this week to acquire the updated Ferrari F40 on Cults3D, Patreon, and Thanqs. Make your dream of having a Ferrari F40 on your shelf come true!

--⚙️ CONFIG --

🛠️ It is possible that the assembly of the car may require the use of a file, sandpaper or small drill bit to make the parts fit together correctly.

The example model has been printed at 6cm long, although larger models can be made if desired.

🖨️ Printer: Uniformation GKTWO (SLA Printer)
💧 Resin: ELEGOO 8K

▪️ Layer Height: 0.02
▪️ Bottom Layer Count: 16
▪️ Exposeture Time: 2s
▪️ Ambient temperature: 25ºC
▪️ Rest Time Before Lift: 0.5s
▪️ Rest Time After Lift: 0.0s
▪️ Rest Time After Retract: 2s
▪️ Bottom Lift Distance: 2 + 5mm
▪️ Lifting Distance: 2 + 2 mm
▪️ Bottom Retract Distance: 7 + 0 mm
▪️ Retract Distance 2 + 2 mm
▪️ Bottom Lift Speed: 80 & 100 mm/min
▪️ Lifting Speed: 120 & 220 mm/min
▪️ Bottom Retract Speed: 100 + 0 mm/min
▪️ Retract Speed: 220 & 80 mm/min



Model Kit

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Exor

Ferrari F40 | Scale model kit car