Little brother to the [Tickler BB-13](https://than.gs/m/1034516?affiliateCode=Jaatinen3D) and [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D), but this one is spring powered and ejects the shells automatically! It's half blaster, half satisfying fidget toy! Works with both 3d-printed bullets and 6mm airsoft BBs!

---

&nbsp;

**Printing tips:**
All the parts are already aligned in the orientation they should be printed in. The _Frame Half 1 & 2_, _Firing Pin_ and _Trigger_ require supports. _Slide_ has small built-in supports you need to remove after printing.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the print settings I used to print this (many times)!

---

&nbsp;

**Assembly:**
You'll need __two pen springs__, __one stronger spring at least 25mm long__ and __one small rubber band__ to assemble this! Watch the included assembly video to see how it's done!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Tickler Mini — Shell-ejecting airsoft blaster

Tickler Mini - Bambu Project.3mf

_The model is available for free for all my membership subscribers (and available to buy individually). [Check out my membership tiers!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D)_

---

&nbsp;

---

Check out the [Extended Accessories pack](https://than.gs/m/1077108?affiliateCode=Jaatinen3D) for this pistol!

---

Check out the new [Tickler Mini](https://than.gs/m/1258953?affiliateCode=Jaatinen3D), a spring powered shell-ejecting blaster!

---

&nbsp;

This cool looking semi-automatic pistol has a large magazine that holds up to 17 BBs!

**Assembling this requires no glue or bolts or nuts! Apart from the printed parts, you'll only need two rubber bands (10-30mm diameter)!**

See it in action here: https://youtube.com/shorts/2FCBjJJqB3w

Includes a complimentary **Pistol Bullet Weapon Charm**! The weapon charm chain has an end clip that is compatible with all my Ringchaku designs, so you can attach any Ringchaku end to it! Although most of them are probably too big... But stay tuned for more weapon charms in the future!


&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation.

Use supports for *Housing Left*, *Housing Right*, *Magazine Body*, *Trigger* and *Magazine Release*. All others are up to how your printer can handle small bridges and overhangs.

If you use Bambu Studio or OrcaSlicer, a couple of handy print project files with painted parts and good support settings are included as well!

&nbsp;

**Assembly:**
Watch the included assembly video!

---

&nbsp;

_There's been a rumor of a_ charming _little mystery... You should check it out, maybe there's something in it for you? [I've marked it on your map.](https://jaatinen3d.com/arvoitus/)_

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol

Housing Right.stl

Extended barrels and magazines for the [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D).

**Extended barrels:**
- Normal extended length version (~6cm). There's a single piece vertical version along with the split version. Split version is faster to print if you want to print it in multicolor.
- Extra extended big boy version (~20cm).

See the included assembly video!

**Extended magazines:**
- Normal extended length version.
- Extra extended big boy version.

Disclaimer: I don't think it's possible to find a rubber band that is both elastic enough to allow the loading of the full extended magazines and also still tight enough to pull the last BBs from an almost empty magazine. So the extended magazines are mostly for shits & giggles. But they will of course work with at least the normal amount of BBs.

Magazine

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tickler Mini — Shell-ejecting airsoft blaster

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol

Tickler SA-6 — Extended Accessories