Combine different caps, gills, stems, and attachments to make your own wavey psychedelic mushrooms! Print the pieces in different colours to make your mushrooms even more magical. Attachments allow mushrooms to stand on flat surfaces or to be secured to wood or metal surfaces.

See here for video: https://youtu.be/kZfBCG7c2Xw 

Mushroom sets with the same number were derived from the same wave field, so there is some consistency of waveforms across the different mushroom pieces.  All pieces screw together and are interchangeable though, so you can mix and match!

These pieces are also compatible with this Modular Mushroom set:  https://social.thangs.com/m/53049. Video: https://youtu.be/CwCNpHwJh0o

The “Base” allows the mushroom to stand up on its own. “Bottom Cap Screw” allows you to use a screw to attach the mushroom to a surface. “Bottom Cap Magnet” has a spot for a 1/4” x 1/8” cylindrical magnet to let you attach the mushroom on to a metal surface. “Bottom Cap Plain” has a plain, smooth surface.

Wave textures designed with nTopology.


Wavey Modular Mushrooms

Wavey Mushroom Display Only Do Not Print.stl

A set of bowls inspired by, yes, shrubbery.

See here for video: https://youtu.be/txkC91Bbi84 

The measurement in the file name indicates the approximate diameter of the top of the bowl.

See here for other bowls in the set:
Small (50mm): https://social.thangs.com/m/514936 
Medium (100mm): https://social.thangs.com/m/514937 
Large (150mm): https://social.thangs.com/m/514938 



Shrubbery Bowl (large)

A set of bowls inspired by, yes, shrubbery.

See here for video: https://youtu.be/txkC91Bbi84 

The measurement in the file name indicates the approximate diameter of the top of the bowl.

See here for other bowls in the set:
Small (50mm): https://social.thangs.com/m/514936 
Medium (100mm): https://social.thangs.com/m/514937 
Large (150mm):


Shrubbery Bowl (medium)

A set of bowls inspired by, yes, shrubbery.

See here for video: https://youtu.be/txkC91Bbi84 

The measurement in the file name indicates the approximate diameter of the top of the bowl.

See here for other bowls in the set:
Small (50mm): https://social.thangs.com/m/514936 
Medium (100mm):
Large (150mm):


Shrubbery Bowl (small)

A set of bowls inspired by, yes, shrubbery.

See here for video: https://youtu.be/txkC91Bbi84 

The measurement in the file name indicates the approximate diameter of the top of the bowl.

See here for other bowls in the set:
Small (50mm):
Medium (100mm):
Large (150mm):


Welcome the fall season with this cute and functional stackable pumpkin! Perfect for storing small items like candy or trinkets, this design adds a festive touch to any space. It’s easy to print and assemble, and the best part? You don’t need an AMS printer. A practical and cute addition to your autumn décor, it’s perfect for the holidays!

**Print Settings**
- No brims required
-  Supports required. I suggest printing with the top facing down with tree supports.
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
-  0.12 - 0.2mm layer height

**Items Used:**
- Peach PLA: https://amzn.to/4f5Ajbp
- Seabreeze PLA: https://amzn.to/3Y5lONV

**Assembly Video:**
https://youtu.be/aXemDOLJy34

Stackable Pumpkin Storage Container - Fall, Autumn, Halloween or Thanksgiving Decor

pixelandpapier__stackable_pumpkin__bottom.stl

Light up any space with these charming LED candle holders in the shape of a bear and an owl. Designed to let LED candles shine through the intricate details, they create a cozy and warm atmosphere—perfect for festive decor or adding a special touch to any corner. These holders require no additional supports and are easily scalable to fit different LED candle sizes.

**File Details:**

Formats: STL and 3MF
Easy printing without supports
Scalable for various LED candle sizes

Download now and create your own decorative lamps at home!

Powered by Make My Lantern from MakerWorld.

No supports needed

Only for personal use unless you have a commercial license

Animal Candle Light / no supports / 3mf included

Bear Telight.stl

This giant candy corn is a fun and functional 3D print for the Halloween season. Designed to look like a classic candy corn, it features two spacious compartments, making it great for storing candy, small items, or party treats.

It’s an easy print that doesn’t require an AMS printer, so it’s accessible for all 3D printing setups. Whether you’re looking for festive decor or a functional candy holder, this design offers both.

**Print Settings**
- Brims are recommended for the bottom and middle sections to prevent warping due to their large size
- No supports required
- 8-10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Assembly:**
https://youtu.be/P0vebxIbwFw

**PLA Used:**
Polymaker Peach: https://amzn.to/3ZcBEs6
Polymaker Muted Red: https://amzn.to/3Za9EVW
Polymaker White: https://amzn.to/4gCycNG

Giant Candy Corn Container - Functional Halloween Treat Holder with Two Compartments

pixelandpapier__candy_corn__bottom.stl

Elevate your Halloween and autumn decor with this unique Retro Pumpkin Gelatin container. This design captures the essence of vintage gelatin molds and not only does it add a nostalgic touch to your seasonal decorations, but it also functions as a practical container for candies, trinkets, or other small items.

Whether you're looking to create a spooky centerpiece or a functional autumn-themed storage solution, this file is your go-to choice. 

**Print Settings**
- No brims are needed
- No supports are needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm to 0.2mm layer height

**Assembly** 
Watch the assembly here: https://youtu.be/slwimq3CgCc

**PLA Used**
- Polymaker Peach: https://amzn.to/4cKYxpC
- Polymaker Lime: https://amzn.to/4dNSB0E


Retro Pumpkin Gelatin Container – Perfect for Halloween/Autumn Decor, Jewelry Box

pixelandpapier__pumpkin_gelatin__bottom.stl

**🍁 Magnet shelf 🍁**

- 3 walls, 15% gyroid or 3D honeycomb infill, No supports

- I used 5x2 magnets (5x3 will fit too), I buy them from amazon. CA. You can find them here - [Amazon Magnets](https://www.amazon.ca/dp/B08H1N2HRJ?psc=1&smid=A2T6QUSCEZM8ET&ref_=chk_typ_imgToDp)

- The magnet holes are hidden within the body of the leaves and shelf and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version. To check place magnet on print bed and see if they stick.

- You will need to add a pause in the slicer prior to printing in order to insert the magnets. at 0.2 layer height add a pause on layer 21.

- Print shelf first, magnet orientation doesn't matter. When leaves are paused, place magnets onto printed shelf, pull magnets off the shelf and insert magnets into leaves with the same orientation, careful not to flip them. 

- Do not split to parts or objects

- Shelf can be hung on a nail

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
+
+
📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - [Click here](https://thangs.com/designer/Layersingreen)📌 

Magnet Autumn Shelf

Magnet5x3_shelf.stl

Magnet_shelf_Mushroom_magnet_3mf.3mf

A fascinating, motorized, light-up ferris wheel that's so great it had to be called Spooktacular 😉.  It features pumpkin cars, spider web wheels, and ghosts in the graveyard, to name a few of the details that make this model a fantastic Halloween decoration.

This model does require additional hardware and electrical parts.  The full list of materials is in the assembly instructions PDF.

**Printing Tips**
Use supports where your slicer printer recommends them, which should mostly be on the Front and Rear Support parts, as well as the Jack-'o-Lantern and Stairs.  Also, slow down your print speed for the small, detailed parts.  If you have problems with the Base or Lid warping, add a good-size brim to them to help with adhesion.  Lastly, I recommend printing with 0.2mm layer height and don't be afraid to use lots of different colors!

A note on the use of an AMS: the Base and Jack-'o-'Lantern do benefit from an AMS to get a multicolor print, but I'm sure they will look great even if you don't print with an AMS!

**Assembly Tips**
Come prepared with a good amount of super glue!  I think the gel super glues work best since you don't want it to be too liquid and end up in places you don't want it.  The detailed assembly instructions are attached.

Please like it if you do and leave any comments!  If you're really feeling generous please consider **[buying me a coffee](https://buymeacoffee.com/gcv3d)** so I can keep creating!

Check out my [TikTok](https://www.tiktok.com/@gcv3d)!

Check out my [YouTube](https://www.youtube.com/@gcv3d)!

Spooktacular Ferris Wheel (motorized)

Front Wheel_spooky ferris wheel_v2.stl

Print the branches brown of course, but what color webs do your spooky spiders weave? Try TPU for bouncy webs!

Download includes four different branch and web sizes. Be sure to match the “Web” file with the “Branch” or things will get messy.


Multi Material Spiderwebs

Spiderweb on Branch 3 - Web.stl

This collection of 100 unique pumpkins is designed for single colour printing.

Dual Colour (free): https://than.gs/m/1448798
Single Colour (free): https://than.gs/m/1448800
Resin (paid): https://than.gs/m/1441799



100 Pumpkins – FDM Single Colour

Pumpkin - Full 44.stl

Some yummy oyster mushrooms to add to your fall decor! Download includes files for dual or single colour printing.

Oyster Mushroom Cluster

Oyster Mushroom Cluster 1 - Full.stl

Here's a nice stand for your [Zørp-O'-Lantern head](https://than.gs/m/939862) ([alt](https://than.gs/m/941237))! The neck is angled so you can make the head tilt in different directions based on how to orient it.

Swap filament at 2mm to distinguish the base from the neck. You can glue the head in place or just leave it loose on the stand.

Photographed model was printed at 180% scale using [Polymaker PolyTerra Matte PLA](https://amzn.to/3PHOxFA) ([US direct](https://bit.ly/polyTerra))

FALL

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Clips

Magnet Autumn Shelf

Spooktacular Ferris Wheel (motorized)

Multi Material Spiderwebs

100 Pumpkins – FDM Single Colour

Oyster Mushroom Cluster

Zørp-O'-Lantern Bust Stand

Magnet Autumn Shelf

Spooktacular Ferris Wheel (motorized)

Multi Material Spiderwebs

100 Pumpkins – FDM Single Colour

Oyster Mushroom Cluster

Zørp-O'-Lantern Bust Stand

Wavey Modular Mushrooms

Shrubbery Bowl (large)

Stackable Pumpkin Storage Container - Fall, Autumn, Halloween or Thanksgiving Decor

Animal Candle Light / no supports / 3mf included

Giant Candy Corn Container - Functional Halloween Treat Holder with Two Compartments

Retro Pumpkin Gelatin Container – Perfect for Halloween/Autumn Decor, Jewelry Box