Original Post: 3d scanned by User @AgainstYou (Hans Peter). 

I thought It was super cool and wanted to make a big ones, but the resolution was too low.
After loading it into Fusion360, I re-meshed the model and fixed some of the geometry.

I also made a custom stand to go with it! I hope you enjoy!

(Throne not included in the files)

Note:

   - Download 3mf (smoothed) for highest quality
 
-- Files posted --
There are three eggs; 

   - The original post

        (post made by @AgainstYou (Hans Peter))

   - The High resolution Re-mesh

        (High Resolution original post)

   - High resolution Re-mesh (smoothed)

        (High Resolution post SLIGHTLY smoothed so the edges aren't as sharp)

File types:

   - Fusion360 project file
   -  3mf project file
   - 3mf
   - STL
   - OBJ

Dragon Egg - Game of Thrones - GOT - High Resolution Remake

BrysonCo_GOT_Egg_HighRes_Smoothed_Remake.3mf

BrysonCo_GOT_Egg_HighRes_Smoothed_Remake.stl

BrysonCo_GOT_DragonEgg_ProjectFile.3mf

Targaryen_Egg_Stand.stl

IT FLOATS!!

Impress your friends and family with this levitating dragon egg that makes use of [Bambu's levitating kit](https://store.bambulab.com/products/magnetic-levitation-diy-kit)!

**Printing Instructions:**
The 3mf file provided was created using Bambu Studio and should have the following settings already configured.

Supports:
    Decorative Cover: Yes
    Everything Else: No

Layer Height: 0.2mm

**Assembly:**
Refer to [this video](https://youtube.com/shorts/ltVEjDemJWU?si=eCD3LIcftqrlbk_z) for assembly instructions

Thank you for your time and consideration on this matter.

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Levitating Dragon Egg

Egg.stl

**Update October 26, 2024:** Added “ez” versions of the egg bottoms so it's easier to connect the eggs together.

**Update August 8, 2024:** Added alternative egg tops with a flattened interior roof for easier bridging.

This is a scaled up model of [my original spiral egg](https://thangs.com/designer/Bearded%20Printer/3d-model/Spiral%20Egg-1033505) that can hold the large dragons I've designed!

You still have the same magnetic features of my smaller eggs, but now you can hold so much more!

I've uploaded a large version as well as a GIANT version!

Is it too over-the-top? You decide.

It's recommended that your printer be well tuned to ensure pieces fit comfortably. Tolerances are set to 0.3mm. This puts the fitment somewhere between snug and loose in order to accommodate the wide variety of printers out there and their tuned states.

If you happen to have clearance issues, you can always scale the model up in order to loosen up the tolerances necessary for pieces to fit together properly.

**Print Instructions:**
Required Hardware:
6 - 6x3mm magnets for the egg

Supports: Not required. However, if you want the inside of the egg to look neat toward the top you might consider adding supports.

**Assembly:**
When placing the magnets, ensure the magnets placed in a way where they attract each other when closing the egg.

I've designed the magnets to be a “loose” press fit. Due to the wide variety of printers out there and the various states of tune the printers are in, I didn't want to make the tolerance too tight and make it difficult for those who haven't tuned their printers well enough. So, if your printer is well tuned, you may need to use glue to fasten the magnets.

Happy printing!

Feel free to join [my discord](https://discord.gg/uqJwERhbxf) for additional support, questions, or suggestions!

Dragon egg

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dragon Egg - Game of Thrones - GOT - High Resolution Remake