This set will allow you to add a working dump bed for your 58622 Tamiya Heavy Dump Truck. You will need to have a servo (a short one is best or you will need to cut out some of the ribs in the bed, see video), some additional hardware, 2 captured ball ends, a servo horn and a radio with 3 channels. 

Two versions are available:

1. The "Full Dump" version. 
The full dump version requires a higher torque servo.

2. The "Half Dump" version. 
The half dump version has the pivot point closer to the center so a standard servo will work find due to the cantilever action of the load in the bed. 
Please see the video before you purchase for the hardware needed and how to install this. 

These come in black only with yellow PLA plugs for the bed. There is no option for yellow ABS or ASA plastic and yellow PLA is not stable with heat and will deform. If you want them yellow, you are best to paint them which will also seal the print. 

Servo mounts should be pre-tapped or have holes "cut" with self tapping screws. 

DUMP

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tamiya Heavy Dump Working Dump Bed (58622) - FULL & HALF DUMP VERSION