This “Serpentes nTopologus Voronoicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

See here for other topology snakes in the series:
Serpentes nTopologus Gyroidicus (gyroid): https://thangs.com/mythangs/file/66107 
Serpentes nTopologus Hexhoneycombus  (Hexagonal Honeycomb): https://thangs.com/mythangs/file/66109 
Serpentes nTopologus Voronoicus (Voronoi Volume Infill): https://thangs.com/mythangs/file/66110

See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


Serpentes nTopologus Voronoicus

This “Serpentes nTopologus Voronoicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


This “Serpentes nTopologus Hexhoneycombus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

See here for other topology snakes in the series:
Serpentes nTopologus Gyroidicus (gyroid): https://thangs.com/mythangs/file/66107 
Serpentes nTopologus Hexhoneycombus  (Hexagonal Honeycomb): https://thangs.com/mythangs/file/66109 
Serpentes nTopologus Voronoicus (Voronoi Volume Infill): https://thangs.com/mythangs/file/66110

See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


Serpentes nTopologus Hexhoneycombus

This “Serpentes nTopologus Hexhoneycombus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


This “Serpentes nTopologus Gyroidicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

See here for other topology snakes in the series:
Serpentes nTopologus Gyroidicus (gyroid): https://thangs.com/mythangs/file/66107 
Serpentes nTopologus Hexhoneycombus  (Hexagonal Honeycomb): https://thangs.com/mythangs/file/66109 
Serpentes nTopologus Voronoicus (Voronoi Volume Infill): https://thangs.com/mythangs/file/66110

See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592 


Serpentes nTopologus Gyroidicus

This “Serpentes nTopologus Gyroidicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592 


Articulating Dragon

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Serpentes nTopologus Voronoicus