Leafline vase Print using vase mode (spiralise). To increase the sturdiness of the vase you can increase your extrusion width. The 3mf attached uses an extrusion width of 0.7mm which can be printed w

A vase with a bobbly surface Prints without supports

Tessa Vase 2 A vase created using tessellation patterns. Prints without supports See a timelapse here: https://vimeo.com/836043662?share=copy

Pixelated vase, can be printed in traditional or vase mode

Lattice Vase Print without supports My vase is printed in Sovol Green Rainbow Silk PLA: https://amzn.to/48CnfYq

Tentacle Vase, prints without supports

A vase created using twisted heptagons. Prints without supports

A pair of swirled vases, one clear, the other pixelated Print in vase mode (spiralize)

A vase created using stacks of tiny cylinders that were curved, twisted and layered over one another.

Tubes Vase. It prints without supports and can be scaled up or down (a little). Mine is printed in Voxelab Marsala CF PETG. Filament link: https://amzn.to/3SdGYqa

A straight multifaceted vase. Print in vase mode (spiralize). One of a set of three multifaceted vases. Links to the others below. Curved Multifaceted Vase: https://social.thangs.com/m/609702 Wide M

An elegant petals vase. You can see a timelapse of the print here: https://vimeo.com/885864231?share=copy

A slot together 4 part Jigsaw Vase. This is a collaborative design with 3DPrintBunny. Print in vase mode. Download the plain Swoosh part (seen in black and white) on this page and the Voronoi (seen in

Coral Vase Prints without supports

A butterfly vase in two sizes Prints without supports in normal print mode

A whirly swirly vase. Prints without supports

An asymmetric teardrop vase. Turn it around to give 3 completely different looks. Available in two sizes Want to print and sell this and any of my other models? Subscribe to my Commercial tier here:

A curvy string vase. Print at 0.2mm layer height. If slicing in Bambu Studio set the wall generator to Arachne

This is my Zephyr Vase design. Prints without supports

Rope Twist Vase. Prints without supports Mine is printed in Polymaker Panchroma Gradient Matte PLA (Summer). Filament Link: https://shorturl.at/QbLi1

Bulb Vase designed to printed using normal slicer mode but it can also be printed in vase-mode. Looks beautiful as a single colour or with stripes using filament swaps.

Troll skin vase Print in normal mode without supports

An Edgy Rock Vase Designed to print in normal slicer mode but can also be printed in vase mode.

A gently curved loopy vase. Print in vase mode

A Voronoi Vase which is enclosed. Prints without supports

Vase in the shape of the US mainland designed to be printed in vase mode (spiralize)

A Webby Vase, perfect for Halloween Prints without supports

This is my Roily Vase Prints without supports I printed it at 0.24mm layer height The vases in the picture are printed in Bambu Lab Olive and Brown PETG Translucent. Filament link: https://shareas

A spikey edgy Icey Vase Print with supports touching buildplate

A Spiderweb asymmetric vase Prints without supports

These Thistle Flowers are printed in vase mode. Print at 0.2mm layer height, I increased the number of bottom layers to 15 for solidity. The flowers in my photos are printed in Cookiecad Elixir PLA

This is my Sparkle Vase You can print it in vase mode or using traditional settings

A decorative flared string vase. Print at 0.3mm layer height (no supports) If you are using Bambu Studio set your wall generator to arachne.

A Tall Hepta Vases made up of layered heptagons. It is designed to print in vase-mode (spiralize) and can be scaled up or down

Tessa Vase A vase with two interlaced tessalation patterns on the surface. Prints without supports See a timelapse here: https://vimeo.com/831086337?share=copy

This is a vase with a heart pattern on. I have printed it in one colour and used infill to highlight the detail. For this print I have set the body of the vase to have no walls, top shells or bottom s

This is a loopy vase designed to be an easy starting print for anybody wanting to have a go at printing loops. It is designed to be printed at the standard 0.2mm layer height. To print, upload into

A spooky spider web vase Prints without supports

This is my Ribbon Vase, it has a reservoir for water at the bottom and a stem guide at the top. It can hold either a single stem or maybe a small bunch, up to about 3 or 4. When you print make sure y

This is a twisted star vase with long loops. It is designed to be printed in vase-mode. The photographs show it printed at 0.3mm layer height using a 0.4mm nozzle in Fillamentum Iceland Blue PLA

A Hepta Vases made up of layered heptagons. It is designed to print in vase-mode (spiralize) and can be scaled up or down

This vase can be printed in vase mode or normal mode. In normal mode it will print with 2 or 3 walls so will be sturdier

_This is my experimental vase to test out printing loops using a 1mm nozzle. My settings were: vase mode, 1mm nozzle, 0.8mm layer height, 30mm/s speed

Slim vases designed for a single bloom or a small arrangement. Great for Valentines Day. If you have any dual or tricolour filaments this is a nice print for them because the little facets cause the

A vase mode artwork in the shape of Iceland Print in vase mode (spiralize) Photos provided by 3DVerk: https://3dverk.is

Print this vase in vase mode (spiralise) at 0.3mm layer height. You should be able to see your loops in your slicer preview.

A vase inspired by swirling autumn leaves. Print in vase mode (spiralise) See larger complementary vase here: https://social.thangs.com/m/195616

A vase inspired by swirling autumn leaves. Print in vase mode (spiralise) See larger complementary vase here: https://social.thangs.com/m/195608

A curvy vase. Print in vase mode (spiralize) Watch a video of it here: https://vimeo.com/710664658

A wobbly vase Print in vase mode See it in action here: https://vimeo.com/691690818