Here is a collection of parts that allow you to use the Nimble Flex on any Creality type print head, as found on a lot of printers, like the CR-10, the Tevo Tornado, and others.

There are two main mount versions. One with nut traps and one with inserts.  
The Flex needs a post on the side of the breech, these designs have a separate post. This allows the top surface of the mount to be flat.

Included are 4 different hot end mounts. All hot end mounts use the default hot end cooling fan. The hot end mounts are for the standard Creality hot end (or Microswiss version), the E3D V6, the Mosquito, and the Copperhead hot ends. 

There are 3 different part cooling fans included, a 4010 radial fan, as found on the standard printhead, and two units to mount a 5015 radial fan. One for the left-hand side and one for the right-hand side.

Also included is a BL-Touch mount. All the mounts for the fans and the BL Touch are height adjustable. 

Finally, I also uploaded basic versions of the hot end mount and the left-hand and right-hand adjustable plates. You can use these to design your own mounts for fans or a specific hot end.

All the parts are in Step format. If you want the STL files, have a look here: 
[Thingiverse](https://www.thingiverse.com/thing:4851747)

Nimble Flex for Creality

Mount for the standard 4010 radial fan, including duct

40x10 Radial fan Left

Assembly of the 5015 fan mount and duct for on the left side of the mount.

5015 Radial fan Left

Assembly for the 5015 fan placed on the right-hand side of the Flex mount.

5015 Radial fan Right

Assembly of the hot end mount for the Creality standard type hot end. 

Creality hot end mount

E3D V6 hot end mount

Mosquito hot end mount

Copperhead hot end mount

Assembly of the base parts. You can use these parts as a base for your own designs. 
Included is the left-hand adjusting block, right-hand adjusting block, and the hot end clamp.

Base parts

Assembly for the height adjustable mount for the BL Touch 

BL Touch Mount

This is the assembly of the main mount for the Flex, this one is based on using inserts. 
It also includes the center support post and a mockup of the horizontal Flex. 

Flex_Mount Creality Inserts

The is the main mount for the Nimble Flex. It is based on inserts.