Remix - 8 mm, Quad T Mounting Wall Support Snap - DS Part A
221 downloads · 2 years ago · While there are many ways to bridge panels together, I wanted a stronger support when joining four t
This model is restricted by licensing terms.
View license.
While there are many ways to bridge panels together, I wanted a stronger support when joining four together with an 8mm offset. Left space in the middle to maintain use of the peg.
Remix - 8 mm, Quad T Mounting Wall Support Snap - DS Part A
221 downloads · 2 years ago
This model is restricted by licensing terms.
View license.
Raised Quad Snap (DS Part B)
Raised Quad Snap (DS Part A)
6.25 mm - Quad Snaps (DS Part A) - Medium Command Strip Mount
6.25 mm - Quad Snap (DS Part A) - VHB Tape Mount
6.25 mm - Quad Snaps (DS Part A) - Small Command Strip Mount
%2520-%2520Large%2520Command%2520Strip%2520Mount.png&w=3840&q=75)
12.5 mm - Quad Snaps (DS Part A) - Medium Command Strip Mount
%2520-%2520VHB%2520Tape%2520Mount.png&w=3840&q=75)
12.5 mm - Quad Snap (DS Part A) - VHB Tape Mount
%2520-%2520Small%2520Command%2520Strip%2520Mount.png&w=3840&q=75)
12.5 mm - Quad Snaps (DS Part A) - Small Command Strip Mount
Remix of 12.5 mm - Quad Snaps (DS Part A) - Medium Command Strip + Screw Mount
8 mm, Cross Quad Offset Snap - DS Part A - Command Strip.stl
_-_Part_1.png&w=3840&q=75)
Remix of 8 mm - Quad Offset Snaps (DS Part A Single Piece)
Remix of 8 mm, Cross Quad Offset Snap - DS Part A
15 mm - Quad Offset Snaps (DS Part A)
12.5 mm - Quad Offset Snaps (DS Part A) Community Upload
_-_Large_Command_Strip_Mount.png&w=3840&q=75)
Quad Offset Snaps (DS Part A) - Large Command Strip Mount
%2520-%2520Part%25201.png&w=3840&q=75)
12.5 mm - Quad Offset Snaps (DS Part A)
Remix Quad Snap Connector - DS Part B.stl
%2520-%2520x4%2520Stack.png&w=3840&q=75)
12.5 mm - Quad Offset Snap (DS Part A) - x4 Stack
6.25 mm - Quad Offset Snaps (DS Part A)
Which part B is supposed to work with this? I can't find one that actually fits.