Two Lane 155mm Inner Radius 90 degree rising corner
68 downloads · 3 years ago · This two lane track set in a series of 90 degree 155mm inner radius corners rising from 5 to 40mm. T
This two lane track set in a series of 90 degree 155mm inner radius corners rising from 5 to 40mm. This set of models will require a 400mm x 400mm print space. This is my first attempt at a rising helix. Will need manufactured support for the next track sections, as there is no lip on this model to support attached sections.
Two Lane 155mm Inner Radius 90 degree rising corner
68 downloads · 3 years ago in  andÂ
2 lane 115 Inner Radius 90 degree corner 15 degree bank.3mf
1 Lane 90 degree corner 200mm inner radius.3mf
1 Lane 90 Degree Corner 150mm inner radius.3mf
1 Lane 90 Degree corner 250mm Inner radius.3mf
Tamiya Mini 4wd 2 lane flat 90 corner with mid support
Single Lane various radius turns
Three Lane 115mm Inner Radius Corners
1 lane 115mm IR 90 Corner.3mf
2 Lane 45 Degree 115mm inner Radius corner.3mf
Modular Track pack 2 - Middle Ramp Set
2 Lane 45 degree Lane Split.3mf
Single Lane 45 Degree Corner Collection
Hextraction Riptide Tile
2 lane 30 degree corner
2 Lane 45 degree Corner Collection
2 Lane 15 Degree Left Curved Custom to OT transition
Large Diameter 20 Degree Single Lane Corners
Large Diameter 15 Degree Single Lane Corners
2 Lane 15 Degree Right Curved Custom to OT transition
