Dual 10mm Tube Clamp with M6 hole
9 downloads · 4 years ago · Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2005257.
Push fit cla
This model is restricted by licensing terms.
View license.
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2005257.
Push fit clamp for two 10mm diameter tubes, with 30mm clearance between the tubes. When fitted, the tubes are 40mm between centres and 50mm overall width. There are two types of clamp provided:
- Large: 40mm width with 6mm hole and recess for an M6 bolt head or nut.
- Small: 10mm width with 6mm hole.
This model is restricted by licensing terms.
View license.
RC Heli Hold Down Clamps - 10mm Skid Tubes
Brake Tubing Clamp - Single .1875" Brake Line Clamp
Double Brake Tubing Clamp - .1875" Dual Brake Line Clamps
.375" Fuel Line Tubing Clamps - Double Fuel, Air & Oil Lines
Tube clamp mount
PTFE Tube Clamp for Prusa MMU
RGB Silicone-Sleeved AIO Tube Clamp Comb Clip Thingamajiggler
M6 Knobs 10mm height
RC Heli Hold Down Clamps - 12mm Skid Tubes
RC Heli Hold Down Clamps - 8mm Skid Tubes
RC Heli Hold Down Clamps - 6mm Skid Tubes
RC Heli Hold Down Clamps - 9mm Skid Tubes
RC Heli Hold Down Clamps - 7mm Skid Tubes
Hold_Down_Clamp_-_Knob_M6_with_logo_-_chamfered.stl
RC Heli Hold Down Clamps - 6.5mm Skid Tubes
RC Heli Hold Down Clamps - 5.5mm Skid Tubes
RC Heli Hold Down Clamps - 7.8mm Skid Tubes
10mm spacer for M6 or 1/4" countersunk bolts
Electric Fence Insulator for Horses – Clamp-On for 76mm (3") Tube – Electric Rope Only
