stov b feste.stl
1 downloads · 5 years ago · petg nozzle 0.4 layer height 0.20
15% infill bridges speed 80mm/s
bridges flow 105% bridges fan
petg nozzle 0.4 layer height 0.20 15% infill bridges speed 80mm/s bridges flow 105% bridges fan speed 100% cut the end on brushes Print Settings No Supports
stov k feste.stl
6.25 mm - Quad Offset Snaps (DS Part A)
6.25 mm - Offset Snap (DS Part A)
6.25 mm - Dual Offset Snaps (DS Part A)
Raised Dual Snap (DS Part B)
Raised Quad Snap (DS Part B)
Raised Double-Sided Snap (DS Part B)
Offset Snaps Removal Tool
%2520in%2520aciton%25202.png&w=3840&q=75)
Snap (DS Part B)
DS Snaps - Grip Removal Tool
Raised Dual Snap (DS Part A)
Raised Double-Sided Snap (DS Part A)
Raised Quad Snap (DS Part A)
15 mm - Quad Offset Snaps (DS Part A)
6.25 mm - Quad Offset Snap (DS Part A) - x4 Stack
15 mm - Dual Offset Snaps (DS Part A)
6.25 mm - Dual Offset Snap (DS Part A) - x4 Stack
6.25 mm - Single Snap (DS Part A) - Medium Command Strip Mount
%2520in%2520aciton%25201.png&w=3840&q=75)
Faceless Snap (DS Part B)
