Feel Free Lure 11.5 Kayak center console pod spacer. This spacer will allow the console pod to be used if the Overdrive peddle unit is not needed for the trip. I had intended to bolt it to the pod but found that a good marine silicone was suffice to hold it in place. Now the pod will rest against the brace used by the peddle drive unit and allow the pod to be secured in place with the strap. A variable that must be taken into account is that your drive unit plate might be slightly higher or lower than mine so adjustments to the STL may be required. I left a notch cut out in case there is a need to reinstall the original hardware.