📣 Build-a-Duck Cheerleader Add-On STL | Cheer Pom Poms, Hair & Bow | 3D Printable Duck Accessories | No AMS Needed | Commercial License 🎀 Get your Build-a-Duck ready to cheer with this adorable Cheerleader add-on bundle! This spirited set transforms your duck with stylish cheerleader hair, an oversized bow, and fluffy pom poms, making it the perfect accessory for school spirit, pep rallies, game day, and team celebrations. Perfect for cheerleaders, sports fans, school events, craft fairs, tiered tray displays, gifts, and collectors of modular Build-a-Duck accessories, this easy-to-print set is designed as single-color STL files, making printing simple, reliable, and no AMS required. Whether you're creating a fun display for football season, celebrating your favorite team, showing off school pride, or expanding your Build-a-Duck collection, this bundle is sure to stand out. It also includes a lifetime commercial license, allowing you to print and sell as many physical copies as you'd like. 📣🦆💙

This Cheerleader bundle includes:

• A stylish Cheerleader Hairstyle that gives your Build-a-Duck the perfect game day look.
• A large Cheer Bow that adds the perfect finishing touch and can be printed in your favorite team or school colors.
• A pair of fluffy Pom Poms that transform your duck into the cutest cheerleader on the squad.
• A set of Wings especially made to hold the poms.
• Easy-to-print modular pieces designed for quick assembly and colorful customization
• Clean, bold styling that pairs perfectly with your existing Build-a-Duck collection

Important: This listing includes STL files only for the Pom Poms, Wings, Cheer Bow, and Hair. You must own or purchase the Build-a-Duck Base Model to use this bundle.

https://than.gs/m/1534995

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: Pieces are designed for an easy, seamless fit with your base duck. Swap accessories without reprinting your full model! Minimal glue may be needed for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Pom Poms, Wings, Cheer Bow, and Hair (as shown in photos)
• Optimized for easy printing
• Commercial license included - no subscription or extra fees needed

SAFETY NOTE: Contains small parts that may present a choking hazard. Not suitable for young children or pets. For decorative use only.

Perfect For: Cheerleaders • School Spirit • Pep Rallies • Dance Teams • Sports Fans • Team Gifts • Teacher Gifts • Craft fairs • Gift makers • Expanding your Build-a-Duck collection

Assembly Notes If you have trouble removing the wings, I suggest using a credit card or other thin flat plastic card or tool to wedge under the wing to give you a little leverage to loosen it. Then you will be able to grip the wing to pull off.

INSTRUCTIONS SEE INCLUDED INSTRUCTIONS Some of the accessory pieces may have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this duck, you will be required to remove the head topper, head connector and/or wings. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion and for certain small parts like the eyes.

Assembled Dimensions at full size: Height: Approx 5.71” Width: Approx 3.96” Depth: Approx 4.91" Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – See Included Settings
• Support Type – See Included Settings
• Supports on Build Plate Only - See Included Settings
• Threshold Angle - See Included Settings
• Remove Small Overhangs - See Included Settings
• Brim – Recommended for small parts, hat brim, and Wing
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 - IMPORTANT
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10%+
• Wall Loops – 2+