🏈 Build-a-Duck Football Add-On Bundle STL | Football and Football Helmet | Football Rubber Duck | Commercial License

Get your Build-a-Duck ready for kickoff with this fun Football add-on bundle! This sporty set transforms your duck with a detailed football helmet with facemask, football, and a specially designed wing accessory, making it the perfect addition for football season and game day displays.

Perfect for football fans, tailgates, sports-themed décor, craft fairs, tiered trays, gifts, and collectors of modular Build-a-Duck accessories, this easy-to-print set is designed as single-color STL files, making printing simple, reliable, and no AMS required.

Whether you're creating the ultimate game day display, decorating for football season, or expanding your Build-a-Duck collection, this bundle is sure to score big. It also includes a commercial license, allowing you to sell physical prints made from these files. 🏈🦆

This Football bundle includes:

• A detailed Football Helmet with Face Mask for the ultimate game day look
• A realistic Football accessory that's perfect for displaying your Build-a-Duck ready for kickoff
• A specially designed Wing Accessory that gives your duck a sporty, action-ready style
• Easy-to-print modular pieces designed for quick assembly and colorful customization
• Clean, bold styling that pairs perfectly with your existing Build-a-Duck collection

Important: This listing includes STL files only for the Football Helmet, Football-Holding Wing, and Football. You must own or purchase the Build-a-Duck Base Model to use this bundle.

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: Pieces are designed for an easy, seamless fit with your base duck. Swap accessories without reprinting your full model! Minimal glue may be needed for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Football, Football Helmet, and Wing to Hold Football (as shown in photos)
• Optimized for easy printing
• Commercial license included - no subscription or extra fees needed

SAFETY NOTE: Contains small parts that may present a choking hazard. Not suitable for young children or pets. For decorative use only.

Perfect For: Football fans • Game day décor • Tailgates • Sports lovers • Craft fairs • Gift makers • Fall decorations • Expanding your Build-a-Duck collection

Score Big with Your Build-a-Duck Get your Build-a-Duck ready for game day with this fun football accessory pack featuring a detailed football helmet with facemask, football, and a sporty feather wing accessory for the ultimate football fan look! 🏈🦆

Assembly Notes If you have trouble removing the wings, I suggest using a credit card or other thin flat plastic card or tool to wedge under the wing to give you a little leverage to loosen it. Then you will be able to grip the wing to pull off.

INSTRUCTIONS SEE INCLUDED INSTRUCTIONS

Some of the accessory pieces may have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this duck, you will be required to remove the head topper, head connector and/or wings. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion and for certain small parts like the eyes.

Assembled Dimensions at full size: Height: Approx 5.04” Width: Approx 3.53” Depth: Approx 5.02"

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – See Included Settings
• Support Type – See Included Settings
• Supports on Build Plate Only - See Included Settings
• Threshold Angle - See Included Settings
• Remove Small Overhangs - See Included Settings
• Brim – Recommended for small parts, hat brim, and Wing
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 - IMPORTANT
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10%+
• Wall Loops – 2+