🔔 Multicolor 3MF files are included with this model; however, the Flexi Dachshund Dog shown is not included.

The design uses a magnet measuring 12 mm in diameter and 5 mm thick. When printing at a 0.2 mm layer height, pause the print at layer 111 to insert the magnet.

Prefer a non-keychain or non-magnetic version? Simply remove the negative object named “keychain” or “magnet slot” from the slicer’s part list. You can also resize the slots to fit different keychain hardware or magnet sizes.

Depending on your print settings and filament, you may need to slightly adjust the sign base and wheel connector objects named “Adjust as Needed If It Doesn’t Fit.” A little glue may also be needed for a secure fit.

💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above.

🔔Supports are not required, though adding them to certain parts may help improve the overall print quality.

🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.

🔔Add brim or apply glue to the bottom if extra adhesion is needed.

🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.

❗Please do a test print to ensure quality before starting a mass print.