fanart depictions of the pokemon Gardevoir in all elegance - Set of Bookmarks
2nd set to share tonight:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #3f8e43 PLA Bambu Labs Basic Mistletoe Green (10502) Transmission Distance: 5 #becf00 PLA Bambu Labs Basic Bright Green (10503) Transmission Distance: 4 #ffffff PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Mistletoe Green (10502) At layer #15 (1.28mm) swap to Bright Green (10503) At layer #21 (1.76mm) swap to Ivory White (11100) for the rest.
























