This Week’s Drop: Human Cleric 🛡️☀️

I asked my Patrons which adventurer they wanted to see next, and the Human Cleric came in second after the Elf Ranger we released a few weeks ago.

I wanted her to feel calm, confident, and powerful. She carries a sun-themed shield and matching staff, ready to protect her allies, patch up the party after a rough fight... or send an undead creature back where it belongs.

This drop includes: Human Cleric

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Key Features

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Note: Use the feature tree to change the colors. Not the paint tool!

Size & Print Settings: 100% Scale (40mm miniature): 32x32x42 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (28/32mm miniature): 24x24x31 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: ≤ 0.08 mm

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.