ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file. ..............................................................................

I am really excited to add to my standing figures with this mostly print-in-place design. To give it the full 360 look, I have added a pop-on tank. And you get two versions of the diving helmet... one with a pop-in closing mask, and one without. Since the nature of silks can be fragile and this model really shines in silk, consider using the open mask for smaller prints.

Happy Printing -Dan

P.S. If you like this design, Check out my other models.

https://www.cults3d.com/en/users/FlexiFactory/creations

Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

3D printing settings STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

I print with .12 or .16 layer height for quality.

As usual, make sure you have good adhesion. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.

I successfully test printed between 50% and 125% for this design. I do not suggest smaller or it could break and not function.

The mask cover is made to be loose so the silk does not break when popping in. It secures with the latch. There is also a version with an integrated mask for smaller prints or if you are concerned about loose parts.

Since this is created in pieces, just size the parts identically to fit your plate and pop them together!

Gradient PLA works GREAT with this model: I have a comprehensive list of Filament I use here: https://amzn.to/4cJzxRM