🦆 Build-a-Duck 4th of July Add-On Bundle STL | Patriotic Uncle Sam Hat, Firework Rocket, Wing & Feet | Independence Day Duck | Commercial License 🎆

Celebrate Independence Day with this patriotic addition to your Build-a-Duck collection! This 4th of July-themed add-on set transforms your duck into a festive Uncle Sam-inspired display, complete with a red, white, and blue top hat, firework rocket accessory, a special wing designed to hold the rocket, and optional feet for a unique seated look.

Perfect for 4th of July decorations, summer displays, craft fairs, tiered trays, patriotic décor, and collectors of modular Build-a-Duck accessories, this easy-to-print set is designed as single-color STL files, making printing quick, simple, and beginner-friendly.

Whether you're decorating for Independence Day, adding to your patriotic collection, or creating fun seasonal displays, this bundle brings plenty of red, white, and blue charm to your Build-a-Duck lineup.

This Fourth of July bundle includes:

• An Uncle Sam-Inspired Patriotic Hat featuring stars and stripes
• A Firework Rocket Accessory for a festive holiday display
• A Special Right Wing Designed to Hold the Rocket for an interactive look
• Cute Optional Duck Feet to create a seated display style (OPTIONAL)
• Clean, bold styling that pairs perfectly with your existing Build-a-Duck collection

Important: This listing includes STL files only for the Patriotic Hat, Firework Rocket, Rocket-Holding Wing, and Optional Feet. You must own or purchase the Build-a-Duck Base Model to use this bundle.

https://than.gs/m/1534995

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: Pieces are designed for an easy, seamless fit with your base duck. Swap accessories without reprinting your full model! Minimal glue may be needed for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Rocket-Holding Wing, Firework Rocket, Patriotic Hat, and Optional Feet Accessories (as shown in photos)
• Optimized for easy printing
• Commercial license included — no subscription or extra fees needed

SAFETY NOTE: Contains small parts that may present a choking hazard. Not suitable for young children or pets. For decorative use only.

🎁 Perfect For: Fourth of July Decor • Independence Day décor • Rubber duck collectors • Craft fairs & vendor booths • Etsy & small shop sellers • Cute seasonal display pieces

Celebrate Independence Day with Your Duck Collection Add a patriotic touch to your Build-a-Duck collection with this fun 4th of July accessory pack featuring an Uncle Sam hat, firework rocket, and festive red, white, and blue charm!

Assembly Notes If you have trouble removing the wings, I suggest using a credit card or other thin flat plastic card or tool to wedge under the wing to give you a little leverage to loosen it. Then you will be able to grip the wing to pull off. GLUE REQUIRED: Glue is required for the white stripes on the hat and recommended for the pieces of the firework.

TIGHT FIT: The stars on the hat and firework are designed for a snug fit and may print slightly tighter depending on your printer's calibration and filament settings. If the fit is too tight, I recommend scaling the stars to 98% as a starting point. The sample shown in the photos was printed at the original size with no scaling. Assembly Tips:

• Firework stars: These are designed as a snap-fit connection, so some resistance during assembly is normal.
• Hat stars: For the best fit, insert the star into one red hat piece first, slide it through the center section, and then align and press it into the second red hat piece. If you have any trouble with the fit, feel free to reach out and I'll be happy to help.

SHARP PIECES: Just a reminder that plastic can be sharp. The points on the stars can be sharp so use caution while assembling. Some of the accessory pieces may have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this duck, you will be required to remove the head topper, head connector and/or wings. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion and for certain small parts like the eyes.

Assembled Dimensions at full size with optional feet: Height: Approx 5.87” Width: Approx 4.42” Depth: Approx 4.90" Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Type – Tree
• Supports on Build Plate Only - No
• Threshold Angle - 30
• Remove Small Overhangs - NO
• Brim – Recommended for small parts and Wing
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 - IMPORTANT
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10%+
• Wall Loops – 2+