Meet Stitch-Buddy — a modular 3D printable character designed for those who love detail and storytelling. Whether you want the sweet Braided Belle or the bold Dreadlock Dare, you can swap parts to bring your own unique character to life. Every seam and curve was meticulously sculpted in Nomad Sculpt to give this piece a handcrafted, soulful aesthetic. Why you’ll love it: Modular Magic: Mix and match heads, limbs, and accessories. High-Detail: Sculpted for perfection, capturing a "hand-stitched" look. Perfect for Display or Play: A project that’s fun to print, paint, and assemble. Printing Guide (Simple & Clean) Layer Height: 0.12–0.16mm (for best detail). Infill: 15–20%. Walls: 3 walls (1.2mm) for extra strength on the pegs. Supports: ON: For Torso, Arms, Legs, and Heads. OFF: For Boots (print flat on the sole). Pro-tip: Use Tree Supports for better results on hair and fingers. Brim: Recommended for the Heads and small parts to ensure they don't pop off the bed. Assembly & Tips Prep: Clean supports gently. Use 120/400-grit sandpaper if the peg fit feels too tight. Dry-Fit: Always test-fit the pegs before applying glue. Paint: To get that "worn-in" toy look, use a matte primer and dry-brush highlights on the hair and denim textures. Scaling: Pegs are designed with 0.15mm clearance. If your printer is tuned differently, a ±2% scale adjustment should do the trick. Designed for both FDM and Resin printers. Designer Note: "I pour my heart into every sculpt. If you like the personality of Stitch-Buddy, please Follow my profile! Your support keeps the creativity flowing for the next character."