🔔Multicolor 3MF files are included for this model. Please note that the dog bowl shown in the picture is not included.

This set comes with 3versions:

• Classic Flexi Body
• Regular Springy Body
• Extra-Long Springy Body

If you’d like the non-keychain version, you can remove the loop directly from the slicer’s part list.

Depending on your print settings or filament material, you may need to adjust the joint object named “Adjust as Needed If It Doesn’t Fit”, located under the head object, to achieve the best fit between the head and body.

Please note that the springy component may be fragile because the model is small and only has 3 walls. Do not apply too much force, and handle it with care.

For extra strength, you can upscale the print. If you want a more playable and durable version that is less likely to break, I recommend printing the Classic Flexi Body instead.

Please also note that because the dog’s head is relatively heavy, the Classic Flexi Body version may have some difficulty standing upright.

For better stability, I recommend posing it lying down or with the head tilted upward, as shown in the picture. I will continue testing and improving this in future models in the series.

💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above.

🔔Support under the dog’s ears is required, while supports for other parts are not required but may help improve the overall print quality.

🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.

🔔Add brim or apply glue to the bottom if extra adhesion is needed.

🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.

❗Please do a test print to ensure quality before starting a mass print.