Sharing 3 models sets tonight - first up are several hueforge bookmark designs of anime characters from such series as demon slayer, etc.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.0645mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #042f56 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 #7d6556 PLA Bambu Labs Matte Dark Brown (11801) Transmission Distance: 2 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5.1 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Dark Blue (11602) At layer #10 (0.88mm) swap to Dark Brown (11801) At layer #14 (1.2mm) swap to Jade White (10100) for the rest.