Half good and half bad - half light and half dark - Rabbit splits the difference - Set of bookmarks
3rd set for tonight: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.07312mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5e43b7 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 #becf00 PLA Bambu Labs Basic Bright Green (10503) Transmission Distance: 4 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5.1 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Purple (10700) At layer #12 (1.04mm) swap to Bright Green (10503) At layer #17 (1.44mm) swap to Jade White (10100) for the rest.
























