Designs from the family and shields - set of bookmarks
For this set of models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.07312mm
#4d3324 PLA Bambu Labs Matte Dark Chocolate Transmission Distance: 0.5 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #ff9016 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Dark Chocolate At layer #9 (0.8mm) swap to Cyan (10603) At layer #13 (1.12mm) swap to Pumpkin Orange (10301) At layer #16 (1.36mm) swap to Beige (10201) for the rest.
























