📚 Book Lover Gnome STL | Build-a-Gnome Add-On | Daisy Hat & Book Stack Accessories | Girl Build-a-Gnome Series | Commercial Use 🌼

📖 Celebrate the joy of reading with this adorable Book Lover Gnome add-on for your Girl Build-a-Gnome collection! This printable STL bundle includes a charming daisy-adorned hat and a detailed stack of books with an open book accessory, perfect for creating cozy reader, librarian, and bookworm-themed gnomes.

Whether you're decorating a reading nook, creating gifts for teachers and librarians, stocking your 3D print shop, or adding to a seasonal display, this sweet book-themed set brings a touch of literary charm to any collection.

Designed to fit the Girl Build-a-Gnome Series, these accessories mix and match easily with your favorite base gnome models, allowing you to create endless book-loving combinations for readers, teachers, librarians, students, and collectors alike.

This Book Lover bundle includes:

• 🌼 Daisy Flower Hat - whimsical pointed gnome hat featuring a bright daisy accent for a cheerful, bookish look
• 📚 Stack of Books Accessory - detailed book stack topped with an open book, perfect for creating cozy reading and library-themed displays

Important: This listing includes STL files only for the daisy hat and stack of books. You must own or purchase the GIRL Build-a-Gnome Base Model to use this bundle.

https://than.gs/m/1525159

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: All base pieces are engineered to fit together easily*, making assembly simple and satisfying. This also allows you to use the base model with the add-ons without needing to reprint parts you have already made! The pieces with each add-on will fit seamlessly with the base gnome. Minimal glue may be needed for some accessories for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Daisy Hat and Stack of Books (as shown in the photos)
• Clean, support-light design optimized for easy printing
• Commercial license included — no subscription or extra fees needed

Whether you're decorating your home or selling seasonal items, this modular gnome is a must-have project for your 3D print lineup. Start your collection today and let your gnome evolve with every season!

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.

📚 Perfect For: Book lovers • Librarians • Teachers • Reading enthusiasts • Craft fairs & small business sellers • Expanding your Build-a-Gnome collection

📖 COLLECT THEM ALL Create the perfect gnome for every holiday and season with fun mix-and-match accessories and themed add-ons!

🌼 Give your Girl Build-a-Gnome a cozy literary makeover with a daisy hat, open book, and stacked novels — and check back often for new seasonal accessories and collectible designs!

Assembly Notes Recommend: gluing the center of Daisy. This accessory set is not held in the hands like most of the other add-ons. This one mostly rests against the body and hands.

Some of the accessory pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this gnome, you will be required to remove a hand or hands to place the accessory in the gnome’s hands. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion or for certain small parts.

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Types -
  • Hat – Normal Default
  • Open Book Pages – Normal Default
  • Books – Tree Organic
• Supports on Build Plate Only – This depends on orientation and preference
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – YES – Only on hat and small pieces or if you have adhesion issues
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 - IMPORTANT
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10 - 15%
• Wall Loops – 2+