The Cosmic Cat - Ruler of all dimensions and Times - Hueforge Art
2nd art piece:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.79x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.0619mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3.1 #e4bd68 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5.1 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #5 (0.48mm) swap to Blue Grey (10602) At layer #10 (0.88mm) swap to Gold (10401) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.






















