a couple art pieces this evening.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 134.79x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.06123mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3.1 #bb3d43 PLA Bambu Labs Matte Dark Red (11202) Transmission Distance: 0.2 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #e4bd68 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 6 unique filaments

Swap Instructions: Start with Black (10101) At layer #5 (0.48mm) swap to Blue Grey (10602) At layer #7 (0.64mm) swap to Dark Red (11202) At layer #8 (0.72mm) swap to Orange (10300) At layer #10 (0.88mm) swap to Gold (10401) At layer #14 (1.2mm) swap to Beige (10201) for the rest.