for me, gardening didn't have to be big or in a large space... what matter is making even tiniest part of nature to thrive and able to exposing their beauty as the part of the whole nature itself. without them, the great nature will not be a same as we always seen it. that's why their existence should be protect.. by us.. and by this guardian dragon of moss and fern planter, to symbolize their values, by using a mighty creature to protect tiny little part of the nature, to exposes their beauty and matters.

this design are meant to be used for indoor or outdoor garden, I suggest to use ABS or ASA if you're using it for outdoor. mine was tested print using PLA as I will just using it for indoor decoration, a mini garden in my desk.

the download will including two size of model for default size and mini printer with their own pre-settings, STLs also Include, no support needed, and pretty fast to be print. there's connected holes in every soil cups, so it will allows water to run through the bottom part of the planter. I guess it will need to add some bottom tray or additional pots so the water leaks will not making the bottom part dirty when this planter used for indoor. Hope You'll like this. Thank You!

Print Setting :

0.4 Nozzle 0.2 with adaptive layer height 5% Gyroid sparse infill test printed with Bambulab PLA Matte filament bed temperature at 65 degree for initial layer, 60 degree for other layers initial layer speed at 30 mm/s and initial layer infill at 50 mm/s No Support single color

pre setting 3MF's file are available for Bambulab A1 mini & Standart A1