This Week’s Drop: Purple Worm 🪱💜

Purple Worms are enormous, so instead of making one miniature, I split this one into three separate pieces.

A massive head bursting out of the ground, screeching in fury, a middle section showing where the worm surfaced before diving back underground, and finally a tail piece, just in case your DM needs to remind everyone exactly how much trouble they're in.

This drop includes: Purple Worm (Head, Body & Tail)

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Key Features

• Easy to print
• Support-free design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Note: Use the feature tree to change the colors. Not the paint tool!

Size & Print Settings: 100% Scale (40mm miniature): 67x68x97 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (28/32mm miniature): 50x51x73 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: ≤ 0.08 mm

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you know what you’re doing and have a smaller nozzle, you can absolutely scale smaller.

Much love 🫰 Sander

This product is not affiliated with, endorsed, or approved by Wizards of the Coast.