🎃🦆 Halloween Rubber Duck Devil STL – Devil Hat, Pitchfork & Jack-o'-Lantern | Build-a-Duck Add-On Bundle | Commercial License Included 👹✨

Give your duck a spooky seasonal makeover with the Halloween Add-On Bundle for the Build-a-Duck series! Whether you're decorating for Halloween, creating festive displays, or selling finished prints, this playful collection adds just the right mix of spooky and fun.

This Halloween bundle includes:

• A mischievous Devil Hat complete with curved horns for a classic Halloween look
• A detailed Pitchfork accessory for your duck to carry
• A special Wing Attachment designed to securely hold the pitchfork
• A cheerful Jack-o'-Lantern Pumpkin prop featuring a classic carved face
• Fun, festive Halloween styling that pairs perfectly with your existing Build-a-Duck collection

Important: This listing includes STL files only for the Devil Hat, Pitchfork, Wing to hold Pitchfork, and Jack-o-Lantern. You must own or purchase the Build-a-Duck Base Model to use this bundle.

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: Pieces are designed for an easy, seamless fit with your base duck. Swap accessories without reprinting your full model! Minimal glue may be needed for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Right Wing Pitchfork Holder, Devil Hat, Pitchfork, and Jack-O-Lantern Pumpkin (as shown in photos)
• Optimized for easy printing
• Commercial license included — no subscription or extra fees needed

SAFETY NOTE: Contains small parts that may present a choking hazard. Not suitable for young children or pets. For decorative use only.

🎃 Perfect For: Halloween decorations, fall décor, pumpkin displays, spooky season collectibles, duck lovers, and 3D printed holiday creations.👻🦆✨

Assembly Note If you have trouble removing the wings, I suggest using a credit card or other thin flat plastic to wedge under the wing to give you a little leverage to loosen the wing. Then you will be able to grip the wing to pull off.

NOTE: The devil hat on this add-on bundle DOES NOT head connector tightly. It was designed to be loose so that the peak would slide over the front of the face. It is only used for stability on the head. The Jack-o-Lantern is optional and is not actually attached to the duck. It sits flush against the body of the duck. The face inserts on the pumpkin are also optional. You may need to use an instrument to push them into place.

Glue recommended for pumpkin stem, pumpkin face, and horns.

Some of the accessory pieces may have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this duck, you will be required to remove the head topper, head connector and/or wings. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion and for certain small parts like the eyes.

Assembled Dimensions at full size: Height: Approx 4.96” Width: Approx 4.19” Depth: Approx 5.02" Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Type - TREE HYBRID
• Supports on Build Plate Only - NO
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – AUTO OUTER – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 – IMPORTANT
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 5 - 15%
• Wall Loops – 2+
• Brim – YES – ONLY on Wing or if you have adhesion issues