👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models then come follow and support me on Patreon - where you'll get access to exclusive models.

Check out this project teaser video: https://www.youtube.com/watch?v=qeR0HGcvJ7k

This is currently a work in progress and will see some major updates - that being said I've done numerous test prints and I expect these exterior walls will be compatible with the finished version. Certain things like window placement and other parts / props might be updated.

I've been continuing work on my Modular Terrain System and focusing on a creating curated kits to help DMs run Curse of Strahd.

This is the next evolution since my Fort project and there are several enhancements to how upper wall parts connect together but it's still compatible with that previous set. You can think of this like an OpenLock tile set but with larger tiles - the key differentiation from this and other sets is that it's split into upper and lower parts (flat stacks) - this allows you to save 50% of the filament, focus on playability and just print the lower sections or splurge printing both. Additionally this system works with my modular interior walls which slide into the floor grid - this allows you to re-arrange the layout of rooms on the fly creating a fog of war.

While I'm published the plain files for free I've created a Kickstarter for folks that want textured versions and to help support this effort over here: https://www.kickstarter.com/projects/adamnant/modular-barovia-part-1 - as of posting this there are only 20 days left to support this campaign but regardless of the outcome I will get this project published and then move onto the next project on my list.

This is currently a work in progress as I've just got the exterior walls done and now I'm working on the interior wall sets. You can see the existing interior walls, modular doors and the fort set via these links:

• Interior Walls: https://www.thingiverse.com/thing:7327757
• Modular Doors: https://www.thingiverse.com/thing:7308818
• Fort Set: https://www.thingiverse.com/thing:7284381 (main exterior doors found here)

Each of these sets above will be updated as well once this project is completed. I have about 40 unique tiles in this set so far - this haunted house / death house includes just a few of those to keep it focused on the kit but I'll be published the entire collection in due time.

For printing - these are generally supportless some of the doorways might complain about supports and it won't hurt to add them so I recommend working with your slicer on those areas. You can print these with resin but I wouldn't recommend it - FDM is your best bet here. Print with a standard 0.4mm nozzle at 0.2mm layer height or other draft modes and 5% infill or less and you should be good. I don't print with a brim as its tedious to clean up but if you have trouble with adhesion then it's a good idea to use those.

For assembly I've labelled the parts by floor and bottom / top. You can use any kind of OpenLock clip but I recommend that springy ones as they're less of a hassle.

That's it for now - be sure to check out the project on kickstarter: https://www.kickstarter.com/projects/adamnant/modular-barovia-part-1 if you like my work and want to support me there or on Patreon is a good place.

You can follow along with me on Patreon here to get sneak peaks at my upcoming projects, exclusive minis / models and more!