Experience the charm of touring jolly old England in this classic London style double-decker bus. Introducing the FDM (Fixum Dude Motors) print in place classic style double-decker bus.

Find the entire FDM Collection of vehicles here: Thangs FDM Collection

Includes single color, three color, and a single color version with snap on wheels to print them is a different color than the bus.

Prints without supports. Sample printed in: EXAMPLES:

Three color bus: 1 color, 0.2 layer height, with 3 perimeters, 5 top & 4 bottom layers and 7% gyroid infill in PolyMaker Red PLA, Bambu lab basic black PLA, and Bambu Lab silk siver PLA.

Single color bus: 0.2 layer height, with 3 perimeters, 5 top & 4 bottom layers and 10% gyroid infill in PolyMaker red PLA.

SNAP ON WHEELS:

• Take one axle and fold it in half
• Snap axle into one wheel (wheel tread has direction if you care about which way the tread lines point)
• Snapping the wheel onto the axle will take some force, so a helper tool is provided. Place the folded axle in the tube and use the flat end to apply force
• Place that axle/wheel assembly through the hole on the vehicle, then snap the other wheel on the end of the axle, paying attention to the tread direction if it matters to you.
• The flat side of the helper tool may be used to help press the loose wheel onto the axle. Placing the vehicle/wheel/axle on a flat surface during this process helps.