🦆 Father's Day Rubber Duck STL Bundle - #1 Dad Hat, Coffee Mug, Tie & Wing - Build-A-Duck Add-On | Commercial License Included 🧢

Celebrate Dad with the newest addition to your Build-a-Duck collection! This Father's Day-themed add-on set transforms your duck into the ultimate dad duck, complete with a "#1 Dad" baseball cap, classic necktie, coffee mug, and a special right wing designed to hold the mug.

Perfect for Father's Day gifts, craft fairs, seasonal displays, desk décor, and collectors of modular Build-a-Duck accessories, this easy-to-print set is designed as single-color STL files, making printing quick, simple, and beginner-friendly.

Whether your dad runs on coffee, wears the dad uniform proudly, or simply deserves a fun and unique tribute, this add-on bundle brings personality and charm to any Build-a-Duck display.

This Father’s Day bundle includes:

• A "#1 Dad" Baseball Cap that celebrates Dad in style
• A Coffee Mug Accessory because every great dad runs on coffee or tea
• A Right Wing Designed to Hold the Mug for a fun and interactive display feature
• A Classic Dad Necktie that completes the iconic dad look (OPTIONAL)
• Clean, bold styling that pairs perfectly with your existing Build-a-Duck collection

---

Important: This listing includes STL files only for the Baseball Hat, Coffee Mug, Wing with holder, and Neck Tie. You must own or purchase the Build-a-Duck Base Model to use this bundle.

---

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: Pieces are designed for an easy, seamless fit with your base duck. Swap accessories without reprinting your full model! Minimal glue may be needed for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Right Wing Coffee Cup Holder, Coffee Mug, #1 Dad Baseball Hat, and Necktie (as shown in photos)
• Optimized for easy printing
• Commercial license included - no subscription or extra fees needed

SAFETY NOTE: Contains small parts that may present a choking hazard. Not suitable for young children or pets. For decorative use only.

🎁 Perfect For: Father's Day gifts • Dad-themed décor • Rubber duck collectors • Craft fairs & vendor booths • Etsy & small shop sellers • Cute seasonal display pieces

Include Dad in Your Duck Collection Bring a little dad humor and coffee-powered charm to your Build-a-Duck collection with this fun Father's Day accessory pack!

Assembly Note If you have trouble removing the wings, I suggest using a credit card or other thin flat plastic to wedge under the wing to give you a little leverage to loosen the wing. Then you will be able to grip the wing to pull off.

NOTE: The baseball hat on this add-on bundle DOES NOT use the head connector.

Some of the accessory pieces may have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this duck, you will be required to remove the head topper, head connector and/or wings. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion and for certain small parts like the eyes.

Assembled Dimensions at full size: Height: Approx 5.03” Width: Approx 3.53” Depth: Approx 4.57"

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA . Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports - PDF file included with settings
• Support Type - PDF file included with settings
• Supports on Build Plate Only - PDF file included with settings
• Threshold Angle - PDF file included with settings
• Remove Small Overhangs - PDF file included with settings
• Brim - PDF file included with settings
• Top Z-Distance - .28 - IMPORTANT
• Bottom Z-Distance - .28 - IMPORTANT
• Layer Height - 0.2mm or smaller
• Nozzle Size - 0.4 or smaller
• Seam - position depends on piece and orientation on the plate
• Infill - PDF file included with settings
• Wall Loops - 2