🔧 Build-a-Gnome Mechanic Add-On STL Bundle – Baseball Cap, Tire, Oil Can and Wrench 🛞🧰

Get your gnome ready to hit the garage with the Mechanic Gnome Add-On Bundle - a fun and hardworking upgrade for the Build-a-Gnome base model (sold separately). Perfect for Father’s Day gifts, garage décor, mechanic shop displays, or anyone who loves cars and tools!

This Mechanic-themed bundle includes:

• A detailed Mechanic Baseball Cap with crossed tool emblem
• A rugged Tire Prop for the gnome to hold
• A classic Wrench accessory
• An Oil Can accessory for the perfect garage look Important: This listing includes STL files only for the mechanic hat, tire, wrench, and oil can. You must own or purchase the Build-a-Gnome Base Model to use this bundle.

---

https://than.gs/m/1384082

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: All base pieces are engineered to fit together easily*, making assembly simple and satisfying. This also allows you to use this base model with the add-ons without needing to reprint parts you have already made! The pieces with each add-on will fit seamlessly with the base gnome. *Minimal glue may be needed for some accessories for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Mechanic Hat, Tire, Wrench, and Oil Can (as shown in the photos)
• Clean and optimized for easy printing
• Commercial license included — no subscription or extra fees needed

Whether you're creating gifts for car lovers, decorating a workshop, or expanding your seasonal Build-a-Gnome collection, this mechanic bundle is a fun addition to your 3D print lineup.

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.

🧰 Add a little garage charm to your gnome and collect all the Build-a-Gnome seasonal and hobby-themed add-ons!

Assembly Notes To assemble this add-on:

1. Remove both Hands.
2. Attach Wrench and Oil Can to Tire.
3. Place Tire against Shoes and Body.
4. Tilt Tire assembly forward and add Hands.
5. Carefully slide Hands into Body.
6. Add remaining pieces of Oil Can – I recommend gluing these pieces.

Some of the accessory pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

For most accessories for this gnome, you will be required to remove a hand or hands to place the accessory. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion of for certain small parts*.

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Types:
  • OIL CAN - TREE DEFAULT
  • TIRE - TREE DEFAULT
  • HAT – TREE STRONG
  • Remaining Parts - TREE DEFAULT
• Supports on Build Plate Only – NO for HAT
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – YES – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28 - IMPORTANT for 0.2 layer height
• Bottom Z-Distance - .28 IMPORTANT for 0.2 layer height
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 8 - 15%
• Wall Loops - 2