Proudly presenting the 2nd design in The Envy Originals: Genesis Welcome Pack—The Beast-King's Maw. This bust is a tribute to raw power and the untamed spirit of the wild, designed to be a centerpiece for any collector's shelf. The Vision and The Story In the heart of the Genesis realm, the "Beast-King" is not just a ruler, but a force of nature. I wanted to capture the exact moment of a thunderous roar—a sound that commands silence across the savannah. My vision was to create a piece where you could almost feel the vibration of the air. The "Maw" represents the entrance to a world of primal dominance, where only the strongest survive. It is designed to look like a relic carved from dark basalt, standing as a warning to those who dare challenge the throne. This model is a labor of intense focus. I spent hours, and sometimes months of dedicated work within Nomad Sculpt to ensure the anatomy of the roar and the flowing strands of the mane were perfect. Every tooth and every wrinkle around the eyes was meticulously placed to achieve this level of high-detail realism. This clear vision and commitment to quality are what you can expect from every single one of my designs, now and in the future. "If you enjoy these designs, feel free to Follow my profile for more upcoming models and updates!" Setting & Manufacturing Instructions This model is designed for high-resolution output. Whether you are using resin or filament, the deep recesses are optimized for beautiful shadows. Resin Printing (Best for Detail) Layer Height: 0.04mm – 0.05mm. Orientation: Print at a slight 15-degree upward tilt to ensure the roof of the mouth and the teeth print perfectly without needing excessive internal supports. Supports: Use medium supports for the base and light "needle" supports for the tips of the mane to prevent any drooping. Finish: Looks incredible in a "Grey" or "Obsidian" resin, then dry-brushed with gold or bronze on the nameplate. FDM Printing (Best for Decor) Layer Height: 0.1mm (Fine) to capture the fur texture. Infill: 10-15% (Lightning or Gyroid infill works best for large busts). Supports: Yes, "Tree" supports are recommended for the upper jaw and the overhangs of the mane. Tip: If printing large, use a wood-filled or marble filament for a classic statue aesthetic.