A nostalgic retro-controller inspired fidget made from 5 satisfying snap-fit pieces — no magnets, no supports, and no extra hardware needed.

RetroSnap is tuned for a clean, support-free print and a crisp, tactile feel. The main body pairs with interchangeable click-style inserts and smooth snap-on covers, so you get that mind-pleasing “click” without metal clickers. Pocket-friendly as a keychain, calming as a desk toy, and a great quick gift print.

Key Features

• 5-Piece Snap-Fit Build: Main body, two interchangeable click inserts, and front/back covers.
• No Supports or Hardware: Designed for easy, reliable prints on most home printers.
• Satisfying Click Feedback: Flex-tuned inserts deliver a subtle, repeatable tactile press.
• Keychain-Ready: Compact silhouette with a clean, retro look.
• Print-Friendly Design: Generous chamfers and tolerances for smooth assembly.

Included STL Files

• Main Body
• Click Insert A
• Click Insert B
• Front Cover
• Back Cover

Recommended Settings

• Material: PLA or PETG
• Layer Height: 0.2 mm
• Nozzle: 0.4 mm
• Walls: 3 perimeters
• Infill: 15–20%
• Supports: None
• Orientation: Print pieces flat on the bed; light edge cleanup improves snap feel.

Assembly Tips

• Dry-fit first. If too tight or loose, scale ±1–2% or adjust flow.
• Press the click inserts into the body until seated; snap on the covers.
• No glue required. Small parts—keep away from young children.

Designed by Vireo Studio to be functional, clean, and mechanically satisfying right off the build plate.