🎆 Build-a-Gnome USA 250 STL Bundle | Patriotic 4th of July Gnome Add-On | American Flag Decor | Independence Day STL Files | Commercial License Included ⭐🎆

✨ Celebrate America’s 250th in Gnome Style! ✨ Red, white, blue… and absolutely adorable!

This patriotic Build-a-Gnome add-on is ready to bring the spirit of the 4th of July to your shop, craft fair table, or holiday décor lineup! 🎆

Celebrate America’s 250th anniversary in patriotic gnome style with this festive USA 250 Add-On Bundle for the Build-a-Gnome base model (sold separately). Perfect for 4th of July décor, patriotic displays, tiered trays, or summer market bestsellers!

This Fourth of July Add-On Bundle includes:

• A large waving American Flag display accessory
• A layered USA 250 anniversary sign
• A patriotic red, white, and blue hat with star accent

Important: This listing includes STL files only for the hat, flag, and USA seal/sign. You must own or purchase the Build-a-Gnome Base Model to use this bundle.

https://than.gs/m/1384082

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: All base pieces are engineered to fit together easily*, making assembly simple and satisfying. This also allows you to use this base model with the add-ons without needing to reprint parts you have already made! The pieces with each add-on will fit seamlessly with the base gnome. *Minimal glue needed for some accessories for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the American Flag, Striped Hat with Star, and USA 250 Sign/Seal (as shown in the photos)
• Clean, support-light design optimized for easy printing
• Commercial license included — no subscription or extra fees needed

Whether you're decorating for Independence Day or expanding your patriotic product lineup, this modular gnome add-on is a fun and eye-catching addition to your 3D print collection. Celebrate 250 years of America with your Build-a-Gnome display!

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.

🎇 Add a little patriotic magic to your gnome and celebrate America’s 250th anniversary in style! Collect all the seasonal add-ons to complete your Build-a-Gnome collection.

Assembly Note Some of the accessory pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.

ALSO NOTE: The blue part of the flag may separate during printing due to the thinness of the part. This will not affect the overall look. Once both pieces are inserted into the flag, the separation will not be seen. I separated mine before assembly to ensure that it does not affect the overall look.

For most accessories for this gnome, you will be required to remove a hand or hands to place the accessory. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion of for certain small parts*. Glue required for: red stripes on flag.

Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate.

Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos.

Recommended Print Settings:

• Supports – YES for some parts
• Support Type - TREE SLIM
• Supports on Build Plate Only - IMPORTANT
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – YES – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10 - 15%
• Wall Loops - 2