Pegasus/Unicorn/Rearing Horse 🐎🪽

This Pegasus is sculpted in a rearing pose, standing on its tail to keep the model stable and printable. The tail also supports one of the front hooves, which helps give the miniature the feeling that it’s lifting into flight. Because of the pose, there is one small support under the other front hoof. The support tree removes cleanly and shouldn’t leave any visible marks.

Two alternate versions are included as well: • Horse version (no wings) • Unicorn version (horn)

Perfect for fantasy campaigns, mounts, statues, or magical encounters.

Print Details

• Easy to print
• Support-optimized design
• Optimized for multicolor FDM
• Matte PLA recommended to hide layer lines

Warning! I really wanted mine to be rearing, because… well, it’s a horse. It just looks cooler that way. Because of that I did end up breaking my most important rule though: There’s one tiny support under the other hoof.

Note: Use the feature tree to change the colors, not the paint tool.

Includes:

• Pegasus miniature
• Horse variant
• Unicorn variant

Files included:

• Multicolor 3MF file (for multimaterial printers & toolchangers)
• Single-color STL file (for resin or single-extruder FDM)

Size & Print Settings: 100% Scale (40mm miniature): 46x31x58 mm

• Recommended nozzle: 0.4mm (standard)
• Recommended layer height: 0.12 mm

75% Scale (32mm miniature): 35x23x44 mm 66% Scale (28mm miniature): 31x21x39 mm

• Recommended nozzle: 0.2mm
• Recommended layer height: ≤ 0.08 mm

Note: I design my minis at 40mm scale because it’s the sweet spot for clean results on a 0.4mm nozzle while still fitting a standard 1-inch grid. If you’re experienced with smaller nozzles, you can absolutely scale smaller.